Newsroom

Hattersheim, 16. May 2023 – Hilscher's smallest network controller netX 90 and the corresponding netRAPID 90 chip carrier are CC-Link IE Field Basic certified. This supports customers especially when entering asian automation markets with Hilscher's multiprotocol technology netX.

Hattersheim, 08. May 2023 – Hilscher Gesellschaft für Systemautomation mbH is a member of the Single Pair Ethernet System Alliance (SPESA). The common goal is to establish Single Pair Ethernet as an international standard for all areas where Ethernet connections are replaced or newly established.

Hattersheim, 27. Apr. 2023 – STL Systemtechnik LEBER GmbH, a provider of development services in the field of embedded and mechatronics systems, and Hilscher are looking to further deepen their cooperation established in 2017. This results in a even better coordination between STL's and Hilscher's engineers as well as a faster pace of development projects for customers.

Hattersheim, 12. Apr. 2023 – The cifX M223090AE PC card in M.2 format offers certified CANopen communication for PC-based automation. This helps manufacturers to prove CANopen compliance of their products to the customers. Read more in the CANopen newsletter of the CiA.

Hattersheim, 30. Mar. 2023 – Hilscher Gesellschaft für Systemautomation mbH is expanding its IoT portfolio with the containerized application netFIELD App PROFINET Tap. The application acts as a software gateway, taps process data from a PROFINET network independently of the PLC and converts it into the MQTT protocol.

Hattersheim, 30. Mar. 2023 – Hilscher Gesellschaft für Systemautomation mbH is expanding its IoT portfolio with the containerized application netFIELD App EtherCAT Tap. The application acts as a software gateway, taps process data from a EtherCAT network independently of the PLC and converts it into the MQTT protocol.

Hattersheim, 23. Mar. 2023 – Embedded Office and Hilscher have entered into a strategic partnership. This means that companies that rely on the established netX technology have a competent integration partner with specific application expertise at their disposal.

Hattersheim, 15. Mar. 2023 – With the netRAPID 90, Hilscher Gesellschaft für Systemautomation mbH expands its chip carrier portfolio for industrial communication of highly integrated field devices. The netX-90-based module acts as a device interface and supports all common fieldbus, Industrial Ethernet and IIoT protocols in one design.

Hattersheim, 07. Feb. 2023 – Promwad, an expert in hardware design and embedded software development, and Hilscher Gesellschaft für Systemautomation mbH are entering into a joint partnership. Promwad's increased focus on industrial automation with its Industrial Automation & Robotics engineering unit is a perfect fit for Hilscher as the netX multiprotocol SoC from the Hattersheim-based company can be used in numerous projects

Hattersheim, 31. Jan. 2023 – The infoteam Software Group, headquartered in Bubenreuth, Germany, is the new integration partner of Hilscher. Both companies had already announced the cooperation at the Smart Production Solutions trade fair in Nuremberg at the end of 2022.

Hattersheim, 14. Nov. 2022 – The management team at Hilscher Gesellschaft für Systemautomation mbH has been reinforced with the addition of Oliver Paffenholz as Hilscher’s new Chief Financial Officer (CFO).

Hattersheim, 08. Nov. 2022 – Hilscher Gesellschaft für Systemautomation mbH, specialist for industrial communication solutions, launches its new brand strategy at SPS 2022 in Nuremberg and presents itself in a completely new corporate design.

Hattersheim, 04. Nov. 2022 – Siemens, one of the world's leading technology groups, and Hilscher, a specialist in industrial communication solutions, have joined forces. Equipped with Hilscher's cifX PC cards, the German technology group now offers its customers the ability to connect their SIMATIC IPCs to all industrial communication networks.

Hattersheim, 13. Oct. 2022 – dieEntwickler Elektronik GmbH (dEE), an industrial hardware and software development service provider from Bad Zell in Austria with expertise in industrial communication and programming of microcontrollers, is now Hilscher's official embedded integration partner. The two companies already have a history of cooperation on numerous development projects based on Hilscher's netX chip technology.

Hattersheim, 14. Sept. 2022 – Helmholz Benelux, one of the leading Dutch experts in PROFIBUS and PROFINET networks, and Hilscher, a specialist in industrial communication solutions, have joined forces in a strategic partnership. The new strategic partnership will benefit customers in the automation segment in the Benelux countries (Belgium, Netherlands, Luxembourg) by streamlining their automation projects.

Hattersheim, 17. Aug. 2022 – Hilscher Gesellschaft für Systemautomation mbH is strengthening its technical expertise on the management team by welcoming Thomas Rauch as the new Chief Technology Officer (CTO).

The current chip crisis presents the semiconductor industry with one of its biggest challenges of recent decades.

The semiconductor industry relies on state-of-the-art technology when planning new production facilities. Thanks to the comX 51CA-RE\R machine builders are now finally able to fully concentrate on the development of their applications when designing their tools for the semiconductor industry.

The comX communication module was developed to equip automation devices with a network interface. Here, all communication tasks are executed autarchically on the module - independent of the target platform processor.

The use of an embedded module has always been a sensible alternative to the traditional and complex Design-In process of a chip. For more than 25 years, Hilscher has been a leader in factory automation with embedded modules for industrial communication and that with a consistent concept.

The future prospects for the semiconductor industry are quite positive, with a projected growth of around 9% in 2022. However, the industry is repeatedly faced with supply bottlenecks due to the effects of the ongoing coronavirus pandemic, amongst other factors. By developing a new comX communication module, especially suited for the semiconductor industry, Hilscher is supporting to cope with the current situation.

Part 4 of our blog series about Single-Pair-Ethernet: A lot of work is still ahead of the industry to get open questions resolved in terms of system adoptions, standard integration and leveraging benefits in relevant use cases. How do the future prospects of SPE look like?

Read the article!

Part 3 of our blog series about SPE: Factory automation networks are already largely based on Ethernet standards today. However, the adoption of Ethernet in the process automation field is still in progress. How does SPE affect these two industrial areas?

Read the article!

Part 2 of our blog series about SPE: While the idea to enable IP based networks down to the sensor level is obviously beneficial, the question is, how SPE is able to deploy in the focused devices and installations.

Read the article!

Part 1 of our blog series about SPE: Single-pair Ethernet, as a new initiative to enable IP based networks to each sensor, adds value through thinner cabling, small footprint plugs and connectors and less space requirements. For that reason, it is suitable to replace numerous existing fieldbuses in the sensor and peripheral area by integrating sensors directly to IT- and Cloudsystems.

Read the article!

Visit us at Austria's central information hub for industrial automation. The trade fair covers all aspects of factory and process automation - from individual components to complete systems and integrated solutions (webste only available in German).

When:

23.-25. May 2023

Where:

Design Center Linz

Europaplatz 1

4020 Linz

Visit Hilscher at the Advanced Engineering in Antwerp! Take your chance and learn more about innovative product development and network with the most important players in the Benelux manufacturing industry.

Booth: 537

When

24.-25. May 2023

Where

Antwerp Expo

Jan van Rijswijcklaan 191

2020 Antwerpen

Come visit us at the all about autmation in Wetzlar – The exhibition for industrial automation in Hesse and the neighbouring German regions. Experience systems, components, software and engineering for industrial automation and industrial communication in the age of Industry 4.0 and network with users from the region at all about automation.

When:

13.-14. Sept. 2023

Where:

Buderus Arena Wetzlar
Wolfgang-Kühle-Straße 1
35576 Wetzlar

Come visit us at the all about autmation in Chemnitz – The exhibition for industrial automation in central Germany. Experience systems, components, software and engineering for industrial automation and industrial communication in the age of Industry 4.0 and network with users from the region at all about automation.

When:

27.-28. Sept. 2023

Where:

Messe Chemnitz
Messeplatz 1
09116 Chemnitz

The highlight event of the automation industry. With its unique concept, the SPS covers the entire spectrum of smart and digital automation – from simple sensors to intelligent solutions, from what is feasible today to the vision of a fully digitalized industrial world.

When:

14.-16. Nov. 2023

Where:

NürnbergMesse

Karl-Schönleben-Str.

Messeplatz 1

90471 Nürnberg

Translating complex technical topics into clear messages and visions to our customers all around the globe is your cup of tea? Perfect,we are looking for a Marketing Manager with Focus Social Media & Video/Foto. Apply now!

Translating complex technical topics into clear messages and visions to our customers all around the globe is your cup of tea? Perfect,we are looking for a Marketing Manager with Focus Content Creation & Website Administration. Apply now!

Are you looking for a job with a lot of responsibility and interfaces? Have you already gained some experience with semiconductors / microelectronics? Then, apply now!

Hattersheim am Main – 40h/week

Du bist Kommunikations- und Organisationstalent durch und durch und hast Lust auf einen Job mit viel Verantwortung, bei dem es Dir nie langweilig wird? Dann bewirb Dich jetzt!

Are you on the lookout for a company at the forefront of technology and innovation, that will stretch and promote you in the long term? Would you like a position where you can give your technical skills free rein? Then, apply now!

Hattersheim am Main – 40h/week

Lay the foundation for a future successful career for yourself with an apprenticeship at our company. During your apprenticeship as an IT specialist for applications development, you will receive a comprehensive insight into the IT department of an industrial company and you will learn how to implement customer-specific information and communications solutions.

Hattersheim am Main – 40h/week

Lay the foundation for a future successful career for yourself with an apprenticeship at our company. The apprenticeship as an industrial clerk will provide you with a comprehensive insight into the various commercial and technical production departments within an industrial company.

Hattersheim am Main – 40h/week

Lay the foundation for a future successful career for yourself with an apprenticeship at Hilscher.

The technical apprenticeship as an electronics technician for devices and systems will provide you with a comprehensive insight into the production area of an industrial company.

Hattersheim am Main – 40h/week