• Profibus

Communication Module Dual-port memory - PROFIBUS DP Slave

The module for all communication tasks

Product Image


COMX 100-CN-DP-Image



At a glance

  • Universal PROFIBUS interface with TTL interface to the baseboard
  • Host connection via dual-port memory
  • Master oder Slave on the same hardware
  • Enables flexible positioning of the network connector

Weitere Informationen


The module for all communication tasks

The comX communication module has been designed to be integrated into automation devices e.g. robot controllers, PLCs or drives to add a network interface. All communication tasks are executed autonomously within the module - irrespective of the processor of the target device.

Process data is exchanged via a Dual-Port-Memory which is accessed either by an 8-/16-bit bus interface or a fast 50 MHz SPI interface.

comX supports all major Real-Time Ethernet protocols as Master or Slave and covers all network-specific demands in just one single module. To support a line topology, the module is equipped with two Ethernet ports. The communication protocol can be changed simply and reliably by loading the appropriate firmware and a software license for masters.

Due to the Hilscher network controller netX, a 10-years delivery guarantee is granted.

Ordering information

Product namePart numberBrief description
COMX 100CN-DP\NIF/DPS1532.412\NIF/DPSCommunication Module Dual-port memory - PROFIBUS DP Slave

The comX communication module is a universal solution for upgrading devices with master or slave functionality. All modules are pin-compatible and have an identical software interface.
There are designs with an integrated network connector and designs in which the network interface is tied to the base board.

Brochures, Whitepaper and Case Studies

Find all our current Media to Embedded Modules at our Media Archive.