Logo Hilscher

Technologies

  • CANopen
  • PROFINET
  •  

Gateway CANopen Slave to PROFINET IO Controller

Cost-optimized entry level Gateway for simple conversions

Product Image

 

NT 50-CO-EN-Image

NT 50-CO-EN

Active

At a glance

  • Integrates a single PROFINET IO Device into a CANopen network
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port

Weitere Informationen

Description

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

Technical Details

ProductProduct nameNT 50-CO-EN
Part number1756.110
Brief descriptionGateway CANopen to Ethernet
Communication controllerCommunication controllernetX 50
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Power supplySupply voltage24 V ± 6 V DC
Current consumption at 24 V (typically)72 mA
Connector typeMini-COMBICON, 2-pin
Communication interface 1Communication interfaceCANopen
Interface typeISO 11898, optically isolated
Connector typeD-Sub male, 9-pin
Communication interface 2Communication interfaceEthernet
Interface type100 BASE-TX or 10 BASE-T, isolated
Connector type1 * RJ45
Diagnostic interfaceTypeEthernet, 4-pin
Connector typeRJ45 socket
DisplayDisplay 1SYS System status
Display 2APL Application status
Display 3COM Communication status
Display 4LINK Link, ACT Activity
Permitted ambient conditionsAmbient temperature (operation)0 … +60 °C
Relative humidity (operation)no condensation allowed
DeviceDimensions (L x W x H)100 x 26 x 66 mm (without connector)
Weightappr. 80 g
Degree of protectionIP 20
Mounting typeon DIN rail EN 60715
ConfigurationConfiguration softwareSYCON.net
ConformityRoHSYes
Conformance with EMC directivesCE signYes
EmissionCISPR 11 Class A
ImmunityEN 61131-2:2003

Ordering information

Product name Part number Brief description
NT 50-CO-EN1756.110Gateway CANopen to Ethernet

netTAP 50 is a protocol converter for simple conversions. It supports conversions from and to one port Real-Time Ethernet, fieldbus and serial automation protocols. The conversion can be either slave to slave or slave to master. As a master, netTAP 50 provides full master functionality to one slave device only.