Home Products Gateways & Switches for Industrial Communication

Gateways for Industrial Ethernet/Fieldbus/Serial

NT 50-MPI

S7-200/300/400 Ethernet programming adapter

S7-SPS remote maintenance, programming, and visualization via Ethernet

Connection via any free PROFIBUS/MPI/PPI port
Cost-effective alternative to original S7 Ethernet CPs
Automatic driver integration into any S7 engineering tool
Easy coupling of two PLCs without Ethernet interface
Immediate coupling of S7-compatible HMI devices via Ethernet
Effortless access via applications developed by the customer, e. g. C++, C#

As directly mountable or firmly attachable DIN rail devices, the adapters netLINK-MPI and netTAP-MPI replace expensive CP communication processors and allow programming, visualizing, and controlling S7-200^®, S7-300^®, or S7-400^® PLCs via Ethernet.

The delivered driver can be integrated as a programming device (PG) into all well-known SIMATIC S7^® engineering tools like STEP7^® or TIA portal. The device is set up with the engineering tool or using conventional web browsers via the embedded web server.

The adapters are suitable to program or change S7-PLC control programs and to design HMI devices with the visualization software WinCC. Ethernet protocol “ISO on TCP” RFC1006 supports the coupling of any third party or SIMATIC^® visualization station with the PLC. Once integrated into the plant or company network and connected to the internet, remote maintenance, and logging via a router across network boundaries with standard TCP/IP protocol are possible, too.

Organized in a network, direct communication between two or several PLCs via Ethernet can be realized. PLCs can even be coupled without Ethernet port. Fully integrated PROFIBUS diagnostics and Master Class 2 DPV1 services allow the complete DP Slave device configuration and parameterization in STEP7^®.

Power is supplied by a 24 V DC connector. The S7 PLC directly supplies the netLINK-MPI connector with power. Since the contacts of connector and socket are connected with each other 1-to-1, the netLINK-MPI connector allows the trouble-free operation of further devices at the same MPI/DP bus.

NT 50-MPI supports the following protocols:

PROFIBUS MPI/DP/PPI
Ethernet

Technical Data

Product	Product name	NT 50-MPI
	Part number	1758.111
	Brief description	S7 Ethernet Programming Adaptor
	Function	Remote monitoring, programming and visualizing of S7-300/400/200
Communication controller	Type	netX 50
Integrated Memory	RAM	8 MB SDRAM
Integrated Memory	FLASH	4 MB serial flash, with boot loader, firmware und configuration
Power supply	Supply voltage	24 V DC ± 6 V DC
	Current (typically)	57 mA (at 24 V), 72 mA (at 18 V), 48 mA (at 30 V); 150 mA with short circuit at the output of PROFIBUS (at 24 V)
	Typical power consumption	1,8 W
	Connector	Mini-COMBICON, 2-pin
Communication interface 1	Communication standard	PROFIBUS
	Interface type	RS-485, optically isolated
	Connector	D-Sub socket, 9-pin
Communication interface 2	Communication standard	Ethernet
	Interface type	10BASE-T/100BASE-TX, isolated
	Auto negotiation	supported
	Auto cross over	supported
	Connector	RJ45 socket
Displays	LED display	SYS, System status
		APL, Application status
		LINK, Ethernet link status
		ACT, Ethernet activity status
Permitted ambient conditions	Operating temperature range	0 °C … +60 °C
Permitted ambient conditions	Humidity	no condensation allowed
Device	Dimensions (L x W x H)	100 mm x 26 mm x 66 mm (without connector)
	Weight	approx. 80 g
	Protection class	IP 20
	Mounting/Installation	on DIN rail EN 60715
Configuration	Configuration software	SyCon MPI or IBHnet-Treiber
Conformity	RoHS	yes
Conformance with EMC directives	CE sign	yes
	Emission	EN 55011 Class A CISPR 11 Class A
	Immunity	EN 61131-2:2003

Order Information

Product name	Part number	Brief description
NT 50-MPI	1758.111	S7-200/300/400 Ethernet programming adapter

Downloads

Download Datasheet

Download Software

Open page [English]

Download Technical Documentation

Related products: Gateways & Switches for Industrial Ethernet/Fieldbus/Serial

NT 151-RE-RE

Gateway Real-Time Ethernet to Real-Time Ethernet

Data transmission between two Real-Time Ethernet networks

Active

NT 151-CCIES-RE/PNS

Gateway CC-Link IE Field Slave to PROFINET IO-Device

Data coupling between CC-Link IE Field and PROFINET

Active

NT 50-CC-EN

Gateway CC-Link Slave to Ethernet

Cost-optimized entry level gateway for simple conversions

Active

NT 50-CC-RS

Gateway CC-Link Slave to Serial (ASCII) or Modbus RTU

Cost-optimized entry level gateway for simple conversions

Active

NT 50-CO-EN

Gateway CANopen to Ethernet

Cost-optimized entry level gateway for simple conversions

Active

NT 50-CO-RS

Gateway CANopen to Serial (ASCII) or Modbus RTU

Cost-optimized entry level gateway for simple conversions

Active

NT 50-RS-EN

Gateway Serial (ASCII) or Modbus RTU to Ethernet

Cost-optimized entry level gateway for simple conversions

Active

NT 50-DN-EN

Gateway DeviceNet to Ethernet

Cost-optimized entry level gateway for simple conversions

Active

NT 50-DN-RS

Gateway DeviceNet to Serial (ASCII) or Modbus RTU

Cost-optimized entry level gateway for simple conversions

Active

NT 50-DP-EN

Gateway PROFIBUS DP to Ethernet

Cost-optimized entry level gateway for simple conversions

Active

NT 50-DP-RS

Gateway PROFIBUS DP to Serial (ASCII) or Modbus RTU

Cost-optimized entry level gateway for simple conversions

Active

NT 50-MPI

S7-200/300/400 Ethernet programming adapter

S7-SPS remote maintenance, programming, and visualization via Ethernet

Active