NFD-3090-PNS-IOLM\W
Active

netFIELD IO-Link Wireless Master PROFINET IO-Device

netFIELD IO-Link Wireless Master – simple solutions through flexible connections
  • Real-Time Ethernet - IO-Link Wireless Gateway

  • Compatible with IO-Link standards of comparable performance

  • Simultaneously supports up to 16 Wireless IO-Link Devices via two parallel tracks

  • Scan mode, simple pairing of IO-Link Devices

  • Wireless range of point-to-point communication up to 10 m

  • Robust IP67 design - No ingress of dust or water

The netFIELD Device IO-Link technology platform integrates complex sensors or actuators into Real-Time Ethernet (RTE) networks. The IO-Link Wireless Master combines reliable IO-Link communication with flexible wireless connectivity. IO-Link wireless equipment operates in the unlicensed 2.4 GHz ISM band and uses frequency hopping. As a part of its technology platform, Hilscher combines established netX 90 technology with an embedded module equipped with a 2-track IO-Link Wireless Master.

The gateway converts PROFINET, EtherNet/IP, and EtherCAT to IO-Link Wireless, and vice versa.

Two parallel IO-Link Wireless transmission tracks enable simultaneous communication with up to 16 IO-Link Wireless devices and reach 5 ms as a min. possible transmission cycle time per device.

An integrated web server enables important functions like firmware download, authentication, and IO-Link port configuration. In addition to the RTE protocol, the IO-Link Wireless Master provides an integrated OPC UA server for configuration and diagnosis in compliance with the official specification "OPC UA for IO-Link companion".

Moreover, maintenance, diagnosis, identification, or configuration are functional components that can be used via an integrated MQTT Client with JSON Integration for “IO-Link over MQTT” definition.

The netFIELD IO-Link Wireless Master is a ready-to-use IP67 device optimized for brand labeling and provides connectivity and IO-Link level integration in harsh environments for machine or plant construction where wire-based solutions cannot be used. In addition, it is perfectly suitable for flexible robotic applications because it allows a full range of motion. In general, the IO-Link Wireless Master is made for any use case which requires a reduction of wiring.

An IO-Link configuration tool for device engineering and accesses to complex IO-Link device description files (IODD) completes the seamless integration of IO-Link Wireless devices into Real-Time Ethernet networks.

Category

Parameter

Value

Product

Part number

1912.102

Model

NFD-3090-PNS-IOLM\W

Description

netFIELD IO-Link Wireless Master PROFINET IO-Device

Function

IO-Link Master Wireless for PROFINET IO with 2 tracks for up to 16 channels

Communication controller

Type

netX 90

Integrated memory

RAM

16 MB SDRAM

FLASH

8 MB

Ethernet communication

Real-Time Ethernet

PROFINET IO-Device

Ethernet interface

Interface type

100BASE-TX, isolated

Auto-negotiation, Auto crossover

yes

Connectors

X31: Ethernet interface, M12, D-coded,
PROFINET IO port 1

X32: Ethernet interface, M12, D-coded,
PROFINET IO port 2

LEDs

System and application

SYS

System status

green/
yellow

APL

Application status

red/green

Power supply

1L (X21)

1L power supply (DC 24 V)

red/green

2L (X21)

2L power supply (DC 24 V)

red/green

PROFINET IO communication

SF

Status failure

red/green

BF

Bus failure

red/green

Ethernet

LINK (X31)

Link status, connector X31

green

ACT (X31)

Activity status, connector X31

yellow

LINK (X32)

Link status, connector X32

green

ACT (X32)

Activity status, connector X32

yellow

Wireless tracks

WT01 ... WT03

IO-Link wireless track status, antenna X1 … X3

red/yellow/green

Wireless ports

WP01 ... WP08

Port status,
wireless IO-Link ports 1 to 8

red/yellow/green

WP09 ... WP16

Port status,
wireless IO-Link ports 9 to P16

red/yellow/green

Power supply 1L, 2L

Voltage supply

24V DC, –25%/+30% (18 V DC … 31.2 V DC)

Power consumption

1L: 0.2 A (at 24 V DC), 2L: 0.1 A (at 24 V DC)

Connectors

X21: Power supply input (Power In),
M12, L-coded

X22: Power supply output (Power Out),
M12, L-coded

Power consumption
(power connectors)

Max. 16 A, Max. current of the device including pass through must not exceed 16 A for 1L and 2L. Observe derating for the maximum current depending on the ambient temperature.

Revers polarity protection

Yes

Ambient conditions

Ambient temperature (operation),

Air flow, during measurement

-25 °C ... +70 °C,

V ≤ 0,5 m/s

Ambient temperature (storage)

-40 °C ... +85 °C

Max. temperature change

3 K / min

Humidity

5 … 95% relative humidity, no condensation permitted

Operating height

0 … 2000 m

Over voltage category

II (EN 60664-1)

Device

Dimensions (L x W x H)

200 x 30 x 20 mm

Housing

Plastics

Weight

212 g, with 3 antennas: 227 g

Mounting/installation

Screw mounting, with 2x M4 screws to the 2 mounting holes.

The upper screw makes contact to FE (functional earth).

Tightening torque

1.2 Nm

Protection class

IP67

Conformity

RoHS

EN IEC 63000:2018 / BS EN IEC 63000:2018

Compliance with EMC

CE sign

yes

UKCA sign

yes

Approvals

FCC

FCC ID: 2ANEG002

ISED

IC ID: 24152-0002

RED

Certificate: In preparation

Firmware download

Web pages

netFIELD Wireless Web Server

Configuration

Software

PROFINET IO-Controller, netFIELD Wireless Web Server,
IO-Link ET

Product name

Part number

Brief description

NFD-3090-PNS-IOLM\W

1912.102

netFIELD IO-Link Wireless Master PROFINET IO-Device