Active
The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogenous networks or such of the same kind to exchange data across given network boundaries. With more than 25 different combinations of the protocols PROFINET, EtherCAT, EtherNet/IP, POWERLINK and Sercos, the device series provides a solution for any conversion.
The integration as simple IO device into the primary network makes the converter compatible with any common PLC. On the secondary side it works either as IO device too or controls a subordinate network as a bus master. The length of the IO data can be scaled to any application and the data in between can be mapped on byte level arbitrarily.
Secure network separation is provided by two Ethernet controllers, each connected to a Dual Ethernet port with integrated switch. That allows realizing star, ring and inline network topologies without further peripherals. Both controllers handle the protocols independent from each other and exchange only the IO data across a data buffer. An overall data processing time lower than 10 milliseconds is achieved.
The devices can be ordered preloaded with firmware and license or unloaded. Unloaded devices minimize the storage costs. Subsequent loading of a firmware configures these devices for any conversion most flexible. All devices are commissioned and diagnosed network independent over USB.
NT 151-RE-RE | Parameter | Value |
---|---|---|
Product | Part number | 1722.122 |
Brief description | Gateway Real-Time Ethernet Slave to Real-Time Ethernet Slave | |
Communication controller | Primary network X2 / Secondary network X3 | netX 51 / netX 100 |
Integrated Memory | RAM | netX 51: 8 MB SDRAM, netX 100: 8 MB SDRAM |
FLASH | netX 51: 4 MB serielles Flash, netX 100: 4 MB serielles Flash | |
SD memory card (optional) | max. 2 GByte, do not use SDHC or SDXC card types | |
Power supply | Supply voltage | 24 V DC ± 6 V |
Current at 24 V (typically) | 190 mA | |
Power consumption | 4.78 W | |
Connector | MINI COMBICON, 5-pin | |
Reverse voltage protection | yes | |
Communication interface X2 | Communication standard | Ethernet |
Interface type | 100BASE-TX, isolated | |
Connector | 2 * RJ45 | |
Auto negotiation | supported | |
Auto cross over | supported | |
Communication interface X3 | Communication standard | Ethernet |
Interface type | 100BASE-TX, isolated | |
Connector | 2 * RJ45 | |
Auto negotiation | supported | |
Auto cross over | supported | |
Diagnostic interface | Type | USB |
Connector | Mini-USB, 5-pin | |
Displays | LED displays | SYS system status |
APL application status | ||
COM0, COM1, COM2, COM3 protocol specific communication status | ||
4 x LINK (RJ45) | ||
4 x ACT (RJ45) | ||
Permitted ambient conditions | Ambient temperature range for operation | If distance to neighboring devices is minimum 17.5 mm: -20 … +60°C; If housing has contact to neighboring device (and if surface temperature of neighboring device does not exceed +70°C): -20 … +50°C |
Humidity | 10 ... 95 %, no condensation permitted | |
Device | Dimensions (L x W x H) | 113.6 mm x 22.6 mm x 99 mm (without connector) |
Weight | 121 g | |
Degree of protection | IP20 | |
Mounting | Top hat rail (DIN rail EN 60715) | |
Configuration | Software | SYCON.net |
Conformity | RoHS | Yes |
Conformance with EMC directives | CE sign | Yes |
ESD Air discharge (DIN EN 61000-4-2) | 8 kV (criterion A) | |
ESD contact discharge (DIN EN 61000-4-2) | 6 kV (criterion A) | |
Immunity: radiated, HF field (DIN EN 61000-4-3) 80 MHz ... 3 GHz | 10 V/m (criterion A) | |
Burst (DIN EN 61000-4-4) | 2.2 kV (criterion B) | |
Surge (DIN EN 61000-4-5) | 1 kV (criterion A) | |
Immunity: conducted (DIN EN 61000-4-6) 150 kHz ... 80 MHz | 10 V/m (criterion A) | |
Radio interference emission (DIN EN 55016-2-3) | 30 ... 2000 MHz (criterion A) | |
Radio interference voltage (DIN EN 55016-2-1) | 0.01 ... 30 MHz (criterion A) |
Brief description | ||
---|---|---|
NT 151-RE-RE/PLS/ECM | 1722.122/PLS/ECM | Gateway POWERLINK Controlled Node to EtherCAT Master |
User manual
Configuration software (Gateway as Real-Time Ethernet slave)
Configuration software (Gateway as PROFINET IO-Controller)
Configuration software (Gateway as EtherCAT Master)
Configuration software (Gateway as EtherNet/IP Scanner)
Configuration software (Gateway as Sercos Master)
The netTAP 151 transmits data between two Real-Time Ethernet networks. It is the ideal solution to exchange data across network boundaries. With more than 25 combinations of the protocols PROFINET, EtherCAT, EtherNet/IP, POWERLINK and Sercos, the device series provides a solution for any conversion.
Reduce the range of devices with the following protocol filters