NJ 100DN-DP
End of life

Exchangeable module dual-port memory - PROFIBUS DP

For mounting at any time in the delivery chain
  • Universal interface of PROFIBUS DP (Master or Slave) in closed IP40 housing

  • Simple plug-in installation without tools

  • Master or slave on the same hardware

  • No additional components required for mounting and connecting to the carrier board

  • Host connection via dual-port memory

The PCI Express Exchangeable Module

The universal Exchangeable Module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.

All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.

netJACK can be mounted quickly and easily - right before shipment or later by the end customer.

With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

NJ 100DN-DP

Parameter

Value

Product

Part number

1623.400

Brief description

Exchangeable Module Dual-port memory - PROFIBUS DP

Communication controller

netX

netX 100

Integrated Memory

RAM

8 MB SDRAM

FLASH

4 MB serial Flash EPROM

Power supply and current

Supply voltage

+3.3 V ± 5 % DC

Typical/maximum current

434 mA / 500 mA

Typical power consumption

1.43 W

System interface

Bus type

Parallel dual-port memory

Connector type

80 pin connector (SAMTEC FSI-140-03-G-D-AB)

Pin distance/pin width

0.45 mm / 0.55 mm

Dual-port-memory size

64 KByte (16 address lines), where 16 KByte used by firmware (14 address lines, lowest 16 KByte)

Width for the data access to the Dual-Port Memory (DPM)

8/16 bit

Communication interface

Communication standard (protocol)

PROFIBUS

Interface type

RS-485, potential-free

Connector

D-Sub socket, 9-pin

Diagnostic interface

Type

USB or UART

Connector

Signal at host interface. Available only if integrated in host system

Display

Display

SYS System Status, green: RUN, yellow: RDY

COM Communication status, green: STA, red: ERR

Environment

Ambient temperature range for operation

-20 °C … +70 °C

Ambient temperature range for storage

-40 °C … +85 °C

Altitude

0 m … 2000 m

Device

Dimensions (L x W x H)

Length: 68.2 mm / 60 mm (with / without DSUB socket), Width: 53.4 mm (at front panel) / 50.4 mm (body), Height : 25.2 mm (at front panel) / 19.2 mm (body)

Weight

approx. 68 g

Housing

Closed module

Protection class

IP40

Mounting/Installation

Via milled footprint holes in the carrier board and retaining brackets. No mounting accessories required.

Mounting/pulling cycles

max. 10

Configuration

Configuration software

SYCON.net

Conformity

RoHS

yes

Reach

yes

UL certification

UL type

cURus

UL file

E334100

Conformance with EMC directives

CE sign

yes

UKCA sign

yes

Emission

EN 55011 / BS EN 55011

Immunity

EN 61131-2 / BS EN 61131-2

Tests

Shock

EN60068-2-27 Ea

Vibration

EN60068-2-6 Fc

Product name

Part number

Brief description

NJ 100DN-DP

1623.400/DPM

Exchangeable module dual-port memory - PROFIBUS DP

Download Software
Download Technical Documentation
Accessory

netJACK Evaluation Board dual-port memory

For every netJACK with dual-port memory or SPI