Kommunikationsmodul Dual-Port-Memory - Real-Time-Ethernet

Flexibles Kommunikationsmodul für die Automation

Universelle Real-Time-Ethernet-Schnittstelle (Master oder Slave) mit Netzwerkstecker "onboard"
Eine Hardware für alle Real-Time-Ethernet-Protokolle
Sofort nutzbar durch vorgeladene Firmware
Firmware-Aktualisierung über integrierten Webserver
Host-Anbindung über Dual-Port-Memory

The module for all communication tasks

The comX communication module is designed to be integrated into automation devices to provide drives, robot controllers, PLCs, etc. with a network interface. Communication tasks are all executed autonomously in the module - irrespective of the processor of the target device.

Process data is exchanged via a Dual-Port-Memory per access by an 8-/16-bit bus interface or a fast 50 MHz SPI interface.

comX supports all leading Real-Time Ethernet protocols as Master or Slave and meets all network-specific requirements in just one single module. To support a line topology, the module is equipped with two Ethernet ports. The communication protocol can be changed simply and reliably by loading the appropriate firmware and a software license for masters.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

COMX 100CA-RE	Parameter	Value
Product	Part number	1531.100
Product	Brief description	Communication Module Real-Time Ethernet
Communication controller	netX	netX 100
Integrated Memory	RAM	8 MB SDRAM
Integrated Memory	FLASH	4 MB serial Flash
Power supply	Supply voltage	+3.3 V DC ± 5 %
	Typical/maximum current	approx. 700 mA/750 mA (at 3.3 V)
	Typical power consumption	approx. 2.5 W
	Power connector	via system bus connector X1
System interface	Type	Parallel Dual-port memory interface
	Connector	50-pin SMT, female connector
	Pin distance	1.27 mm
	Dual-port memory size	16 KByte
	Data width	8/16 bit
Communication interface	Communication standard	Ethernet
	Interface type	10BASE-T/100BASE-TX, potential-free
	Auto negotiation	supported
	Auto cross over	supported
	Connector	2 * RJ45 socket
Diagnostic interface	Type	UART or USB
Diagnostic interface	Connector	Signal at host interface. Available only if integrated in host system.
Display	LED display	SYS System Status, green: RUN, yellow: RDY
		COM0, COM1 Communication status, both green/red
		TX/RX0, TX/RX1, Ethernet activity status, yellow
		LINK0, LINK1, Ethernet link status, green
Environment	Ambient temperature range for operation	0 °C ... +65 °C (Air flow during measurment: 0,5 m/s)
	Ambient temperature range for storage	-10 °C … +70 °C
	Humidity range	10 % … 95 % relative humidity (non-condensing)
Device	Dimensions (L x W x H)	70 mm x 30 mm x 21.5 mm
	Weight	approx. 35 g ... 40 g
	Mounting	using screwable metal bolts, according to comX Design Guide
Configuration	Configuration software	SYCON.net
Conformity	RoHS	yes
Conformance with EMC directives	CE sign	yes
	UKCA sign	yes
	Emission	EN 61000-6-4 / BS EN 61000-6-4
	Immunity	EN 61000-6-2 / BS EN 61000-6-2
	Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method)	EN 61000-4-2 / BS EN 61000-4-2: ± 6 kV, Criterion B
	Fast transient interferences (Burst) according to EN 61000-4-4 / BS EN 61000-4-4	EN 61000-4-4 / BS EN 61000-4-4: ± 2 kV, Criterion B (Communication lines, shielded)
	Surge voltage according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines)	EN 61000-4-5 / BS EN 61000-4-5: 1 kV, Criterion A (Communication lines, shielded)

Product name	Part number	Brief description
COMX 100CA-RE/PNM V3	1531.100/PNM V3	Communication module dual-port memory - Real-Time-Ethernet

Download Software

Open page [English]

Download Technische Dokumentation

Download Datenblätter

Accessory

COMXEB

comX Evaluationboard

Die Entwicklungs-Plattform für alle comX Typen

Serie

Mehr erfahren