NANL-B500G-RE
netANALYZER Real-Time Ethernet Analyzer, Box

Ethernet analysis made easy

  • Extensive analysis for Real-Time Ethernet systems

  • Passive device without affecting the network or PLC

  • Intuitive graphic display

  • Station lists, alarms, process values, network load, and telegram jitter

  • Endless recording with freely definable triggers

Description
Technical Data
Order Information
Downloads

The netANALYZER is a tool for the simple analysis of Real-Time Ethernet networks. A capture-hardware for recording the telegrams in the network as well as a graphical user software for Windows with extensive analysis functions are included within the delivery. Of course, the netANALYZER hardware can also be used in combination with other analysis programs such as Wireshark.

With netANALYZER and the add-on software netANALYZER Scope, you can measure data at any time in the intuitive graphical interface with oscilloscope functions, e.g. process values, network load, communication events and telegram jitter, without affecting the Ethernet network or the PLC.

To narrow down the number of sporadic errors, netANALYZER box supports the autonomous operation without PC. A telegram can thus be recorded "quickly" in the field at the push of a button. For trouble shooting, the extensive trigger function enables the netANALYZER to remain in a plant for a while. If trigger events occur, the netANALYZER automatically generates telegram snapshots that can later be interpreted with the netANALYZER Scope software.

NANL-B500G-RE supports the following protocols:
  • EtherCAT Slave
  • EtherNet/IP Adapter
  • Open Modbus/TCP Client
  • Open Modbus/TCP Server
  • POWERLINK Controlled Node
  • PROFINET IO-Device
  • Sercos Slave
  • EtherNet/IP Scanner
  • PROFINET IO-Controller
  • Ethernet
  • Sercos Master
  • EtherCAT Master

Technical Data

Product

Product name

NANL-B500G-RE

Part number

7313.100

Description

netANALYZER portable Device with Gigabit Ethernet PC interface for Real-Time Ethernet and all 10/100BASE-TX Ethernet Networks (Stand-alone Device)

Function

Passive Ethernet analyzer for RT-Ethernet systems; analyzes the data in a communication link and captures the incoming Ethernet frames. Additionally, events of four digital inputs can be captured.

Power supply and current

Supply voltage

24 V DC ±6 V DC

Maximum current (typically)

700 mA (at 24 V)

Typical power consumption

16.8 W

Power connector

COMBICON, 3-pin, maximum permitted cable length: 3 m. Alternatively connector for barrel plug, maximum permitted cable length: 3 m. Only alternative use permitted!

System interface

Bus type / PC interface

Gigabit Ethernet RJ45 socket, required connection to the PC‚ UPLINK 1 Gb/s: Ethernet RJ45 socket (1 Port)

Capturing interface

USB 2.0 (hard drive or memory stick), max. 500 mA or external power supply

Autonomous operating mode

Data rate approx. 50% network load in case of capturing from a TAP

Measurement interface

Connector

4 x RJ45 socket, channels/ports: 2/4 communication channels with integrated TAP (TAP A, TAP B), and each with two ports for capturing data in both directions (together 4 Ports: Port 0 to Port 3)

Digital signals

‌4x GPIO input/output 3.3 V and 24 V to capture digital signals or to trigger outputs

Timestamp

± 5 ns measurement accuracy, 1 ns resolution

Operating elements

Switch/Button

Power Switch, REC Button to enable data recording in autonomous mode

Permitted ambient conditions

Ambient temperature range for operation

0 °C ... +55 °C (Air flow during measurement: 0,5m/s)

Ambient temperature range for storage

-10 °C ... +70 °C

Humidity range

10 % … 95% relative humidity, no condensation permitted

Pollution degree

The device must be used in a pollution degree 2 environment.

Altitude

0 m … 2000 m

Device

Dimensions (L x W x H)

115 x 62 x 173 mm

Weight

approx. 820 g

Conformity

RoHS

Yes

Conformance with EMC directives

CE sign

Yes

UKCA sign

Yes

Emission

EN IEC 61000-6-4:2019 / BS EN IEC 61000-6-4:2019

Immunity

EN IEC 61000-6-2:2019 / BS EN IEC 61000-6-2:2019

Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Air discharge method)

± 8 kV, Criterion B

Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Contact discharge method)

± 6 kV, Criterion B

Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 80-1000 MHz, 10 V/m, 80 % AM / 1 kHz

Criterion A

Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 1.0-2.7 GHz, 10 V/m, 80 % AM / 1 kHz

Criterion A

Fast transient interferences (Burst) according to EN IEC 61000-4-4 / BS EN IEC 61000-4-4 (Communication and data lines)

± 2.2 kV, Criterion B

Surge voltage, according to EN IEC 61000-4-5 / BS EN IEC 61000-4-5 (Communication and data lines)

1 kV, Criterion A

Conducted RF, according to EN 61000-4-6 / BS EN IEC 61000-4-6: 0,15-80 MHz, 10 V, 80 % AM / 1 kHz

Criterion A

Product

Product name

NANL-B500G-RE

Part number

7313.100

Description

netANALYZER portable Device with Gigabit Ethernet PC interface for Real-Time Ethernet and all 10/100BASE-TX Ethernet Networks (Stand-alone Device)

Function

Passive Ethernet analyzer for RT-Ethernet systems; analyzes the data in a communication link and captures the incoming Ethernet frames. Additionally, events of four digital inputs can be captured.

Power supply and current

Supply voltage

24 V DC ±6 V DC

Maximum current (typically)

700 mA (at 24 V)

Typical power consumption

16.8 W

Power connector

COMBICON, 3-pin, maximum permitted cable length: 3 m. Alternatively connector for barrel plug, maximum permitted cable length: 3 m. Only alternative use permitted!

System interface

Bus type / PC interface

Gigabit Ethernet RJ45 socket, required connection to the PC‚ UPLINK 1 Gb/s: Ethernet RJ45 socket (1 Port)

Capturing interface

USB 2.0 (hard drive or memory stick), max. 500 mA or external power supply

Autonomous operating mode

Data rate approx. 50% network load in case of capturing from a TAP

Measurement interface

Connector

4 x RJ45 socket, channels/ports: 2/4 communication channels with integrated TAP (TAP A, TAP B), and each with two ports for capturing data in both directions (together 4 Ports: Port 0 to Port 3)

Digital signals

‌4x GPIO input/output 3.3 V and 24 V to capture digital signals or to trigger outputs

Timestamp

± 5 ns measurement accuracy, 1 ns resolution

Operating elements

Switch/Button

Power Switch, REC Button to enable data recording in autonomous mode

Permitted ambient conditions

Ambient temperature range for operation

0 °C ... +55 °C (Air flow during measurement: 0,5m/s)

Ambient temperature range for storage

-10 °C ... +70 °C

Humidity range

10 % … 95% relative humidity, no condensation permitted

Pollution degree

The device must be used in a pollution degree 2 environment.

Altitude

0 m … 2000 m

Device

Dimensions (L x W x H)

115 x 62 x 173 mm

Weight

approx. 820 g

Conformity

RoHS

Yes

Conformance with EMC directives

CE sign

Yes

UKCA sign

Yes

Emission

EN IEC 61000-6-4:2019 / BS EN IEC 61000-6-4:2019

Immunity

EN IEC 61000-6-2:2019 / BS EN IEC 61000-6-2:2019

Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Air discharge method)

± 8 kV, Criterion B

Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Contact discharge method)

± 6 kV, Criterion B

Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 80-1000 MHz, 10 V/m, 80 % AM / 1 kHz

Criterion A

Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 1.0-2.7 GHz, 10 V/m, 80 % AM / 1 kHz

Criterion A

Fast transient interferences (Burst) according to EN IEC 61000-4-4 / BS EN IEC 61000-4-4 (Communication and data lines)

± 2.2 kV, Criterion B

Surge voltage, according to EN IEC 61000-4-5 / BS EN IEC 61000-4-5 (Communication and data lines)

1 kV, Criterion A

Conducted RF, according to EN 61000-4-6 / BS EN IEC 61000-4-6: 0,15-80 MHz, 10 V, 80 % AM / 1 kHz

Criterion A

Order Information

Product name

Part number

Brief description

NANL-B500G-RE

7313.100

netANALYZER Real-Time Ethernet Analyzer, Box

LIC/NANL/SA

8582.060

NANL-B500G-RE add-on, autonomous operation without PC

Downloads

Download Software
Download Technical Documentation

Software installation

User manual

Operating instruction manual

API

Errata

Download Datasheet

Accessory

LIC/SCP

Ethernet analysis made easy

The perfect extension for netANALYZER

Active
More

Related Topics and Articles

A photo collage showcasing various Hilscher products
Overview of communication solutions from Hilscher

From turn-key products to highly integrated solutions and complementary software, Hilscher is your partner for industrial communication. Get an overview of how we can help you take the networking of your machines to a whole new level!

More
Overview of our netX communication controllers

Overview of our netX communication controllers. As a highly integrated solution, they allow you to flexibly integrate your machines and production systems into your network regardless of the network standard. We provide hardware, software, certification and support from a single source.

More
Four different embedded modules from Hilscher on a colorful background. The devices are slightly mirrored on the bottom.
Our embedded modules for all industrial protocols

Embedded modules from Hilscher are the ideal solution for integrating a fieldbus or Real-Time Ethernet interface into a compact automation device. They allow field devices such as drives or controllers to be quickly and easily integrated into automated systems.

More
IP40 interchangeable module

Implement the entire range of industrial communication protocols with just one module. netJACK is the universal solution for all applications that require master or slave functionalities.

More
Communication Module

Equip your robots, PLCs or drives with a network interface. comX is the universal solution for all applications that require master or slave functionalities.

More
DIL-32 Communication IC

netIC is your ideal slave solution for simple field devices with a low data throughput, such as barcode scanners, identification systems, valve manifolds and input/output modules.

More
netX chip carrier

Use netRAPID to implement your slave interface quickly and securely. The netX chip carrier is the alternative to cost-intensive in-house developments.

More
Three PC cards on a colorful background. One has a red PCB while the other two are green. One has an AIFX detached network interface connected to it.
cifX – Multiprotocol PC cards for PC-based automation

cifX PC cards are the easiest and fastest way to integrate PC-based devices into an automated environment. Based on our netX communication controllers, you get access to all protocols – in any form factor for any application.

More