NJ 52D-DPS
End of life

Exchangeable module SPI - PROFIBUS DP Slave

For mounting at any time in the delivery chain
  • Universal PROFIBUS DP Slave interface in the closed IP40 housing

  • Host connection via dual-port memory or SPI

  • Simple plug-in installation without tools

  • No additional components required for mounting and connecting to the carrier board

  • Function-compatible substitute for NJ 10D-DPS

The PCI Express Exchangeable Module

The universal Exchangeable Module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.

All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.

netJACK can be mounted quickly and easily - right before shipment or later by the end customer.

With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

NJ 52D-DPS

Parameter

Value

Product

Part number

1672.420

Brief description

Exchangeable module SPI - PROFIBUS DP Slave

Communication controller

netX

netX 52

Integrated Memory

RAM

8 MB SDRAM

FLASH

4 MB serial Flash EPROM

Power supply and current

Supply voltage

+3.3 V ± 5 % DC

Typical/maximum current

375 mA / 450 mA

Typical power consumption

1.32 W

System interface

Bus type

Parallel or serial Dual-Port Memory

Connector type

60 pin connector (SAMTEC FSI-130-03-G-D-AB)

Pin distance/pin width

0.45 mm / 0.55 mm

Dual-port-memory size

64 KByte (16 address lines), where 8 KByte used by firmware (13 address lines, lowest 8 KByte)

Width for the data access to the Dual-Port Memory (DPM)

8/16 bit

Serial dual-port memory interface

SPI Slave, mode 3

Baud rate

Max. 50 MHz

Communication interface

Communication standard (protocol)

PROFIBUS DP Slave

Interface type

RS-485, potential-free

Connector

D-Sub socket, 9-pin

Diagnostic interface

Type

USB or UART

Connector

Signal at host interface. Available only if integrated in host system

Display

Display

SYS System Status, green: RUN, yellow: RDY

COM Communication status, green: STA, red: ERR

Environment

Ambient temperature range for operation

-25 °C … +70 °C

Ambient temperature range for storage

-40 °C … +85 °C

Altitude

0 m … 2000 m

Device

Dimensions (L x W x H)

Length: 68.2 mm / 60 mm (with / without DSUB socket), Width: 53.4 mm (at front panel) / 50.4 mm (body), Height : 25.2 mm (at front panel) / 19.2 mm (body)

Weight

approx. 64 g

Housing

Closed module

Protection class

IP40

Mounting/Installation

Via milled footprint holes in the carrier board and retaining brackets. No mounting accessories required.

Mounting/pulling cycles

max. 10

Configuration

Configuration software

SYCON.net

Conformity

RoHS

yes

Reach

yes

UL certification

UL type

cURus

UL file

E334100

Conformance with EMC directives

CE sign

yes

UKCA sign

yes

Emission

EN 55011 / BS EN 55011

Immunity

EN 61131-2 / BS EN 61131-2

Tests

Shock

EN60068-2-27 Ea

Vibration

EN60068-2-6 Fc

Product name

Part number

Brief description

NJ 52D-DPS

1672.420

Exchangeable module SPI - PROFIBUS DP Slave

Download Software
Download Technical Documentation
Accessory

netJACK Evaluation Board dual-port memory

For every netJACK with dual-port memory or SPI