COMX 100CA-CO
Communication module dual-port memory - CANopen

Flexible communication module for automation

  • Universal CANopen interface (Master or Slave) with network connector onboard

  • Master or slave on the same hardware

  • Usable immediately due to preloaded firmware

  • Host connection via dual-port memory

Description
Technical Data
Order Information
Downloads

The module for all communication tasks

The comX communication module is designed to be integrated into automation devices to provide drives, robot controllers, PLCs, etc. with a network interface. Communication tasks are all executed autonomously in the module - irrespective of the processor of the target device.

Process data is exchanged via a Dual-Port-Memory per access by an 8-/16-bit bus interface or a fast 50 MHz SPI interface.

comX supports all leading Real-Time Ethernet protocols as Master or Slave and meets all network-specific requirements in just one single module. To support a line topology, the module is equipped with two Ethernet ports. The communication protocol can be changed simply and reliably by loading the appropriate firmware and a software license for masters.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

COMX 100CA-CO supports the following protocols:
  • CANopen Slave
  • CANopen Master

Technical Data

COMX 100CA-CO

Parameter

Value

Product

Part number

1531.500

Brief description

Communication Module CANopen

Communication controller

netX

netX 100

Integrated Memory

RAM

8 MB SDRAM

FLASH

4 MB serial Flash

Power supply

Supply voltage

+3.3 V DC ± 5 %

Typical/maximum current

approx. 450 mA … 480 mA (at 3.3 V)

Typical power consumption

approx. 1.5 … 1.6 W

Power connector

via system bus connector X1

System interface

Type

Parallel Dual-port memory interface

Connector

50-pin SMT connector, socket

Pin distance

1.27 mm

Dual-port memory size

16 KByte

Data width

8/16 bit

Communication interface

Communication standard

CANopen

Interface type

ISO-11898, potential-free

Connector

D-Sub plug, 9-pin

Diagnostic interface

Type

UART or USB

Connector

Signal at host interface. Available only if integrated in host system.

Display

LED display

SYS System Status, green: RUN, yellow: RDY

CAN Communication status, green: STA, red: ERR

Environment

Ambient temperature range for operation

-20 °C … +65 °C (Air flow during measurment: 0,5 m/s)

Ambient temperature range for storage

-40 °C … +85 °C

Humidity range

10 % … 95 % relative humidity (non-condensing)

Device

Dimensions (L x W x H)

70 mm x 30 mm x 21.5 mm

Weight

approx. 35 g ... 40 g

Mounting

using screwable metal bolts, according to comX Design Guide

Configuration

Configuration software

SYCON.net

Conformity

RoHS

yes

Conformance with EMC directives

CE sign

yes

UKCA sign

yes

Emission

EN 61000-6-4 / BS EN 61000-6-4

Immunity

EN 61000-6-2 / BS EN 61000-6-2

Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Air discharge method)

EN 61000-4-2 / BS EN 61000-4-2: ± 10 kV, Criterion A

Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method)

EN 61000-4-2 / BS EN 61000-4-2: ± 6 kV, Criterion A

Fast transient interferences (Burst) according to EN 61000-4-4 / BS EN 61000-4-4

EN 61000-4-4 / BS EN 61000-4-4: ± 2 kV, Criterion A (Communication lines, shielded)

Surge voltage according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines)

EN 61000-4-5 / BS EN 61000-4-5: 1 kV, Criterion A (Communication lines, shielded)

Order Information

Product name

Part number

Brief description

COMX 100CA-CO

1531.500/COM

Communication module dual-port memory - CANopen

Downloads

Download Software
Download Technical Documentation
Download Datasheet

Accessory

COMXEB

comX Evaluation Board

Development platform for all comX types

Active
More

Related products: Communication module

COMX 51CA-RE

Communication module SPI - Real-Time Ethernet Slave

Flexible communication module for automation

Active
More
COMX 51CN-RE

Communication module SPI - Real-Time Ethernet Slave

Flexible communication module for automation

Active
More
COMX 51CA-RE\R/ECS

Communication module for the semiconductor industry

The module for the semiconductor manufacturing equipment market

Active
More
COMX 52CA-CCS

Communication module SPI - CC-Link Slave

The module for all communication tasks

Active
More
COMX 52CA-COS

Communication module SPI - CANopen Slave

The module for all communication tasks

Active
More
COMX 52CN-COS

Communication module SPI - CANopen Slave

The module for all communication tasks

Active
More
COMX 52CA-DPS

Communication module SPI - PROFIBUS DP Slave

The module for all communication tasks

Active
More
COMX 52CN-DPS

Communication module SPI - PROFIBUS DP Slave

The module for all communication tasks

Active
More
COMX 52CA-DNS

Communication module SPI - DeviceNet Slave

The module for all communication tasks

Active
More
COMX 52CN-DNS

Communication module SPI - DeviceNet Slave

The module for all communication tasks

Active
More
COMX 100CA-RE

Communication module dual-port memory - Real-Time-Ethernet

Flexible communication module for automation

Active
More
COMX 100CN-RE

Communication module dual-port memory - Real-Time Ethernet

Flexible communication module for automation

Active
More
COMX 100CA-CO

Communication module dual-port memory - CANopen

Flexible communication module for automation

Active
More
COMX 100CN-CO

Communication module dual-port memory - CANopen

Flexible communication module for automation

Active
More
COMX 100CA-DP

Communication module dual-port memory - PROFIBUS DP / MPI

Flexible communication module for automation

Active
More
COMX 100CN-DP

Communication module dual-port memory - PROFIBUS DP / MPI

Flexible communication module for automation

Active
More
COMX 100CN-DP\NIF

Communication module dual-port memory - PROFIBUS DP

Flexible communication module for automation

Active
More
COMX 100CN-DN

Communication module dual-port memory - DeviceNet

Flexible communication module for automation

Active
More
COMX 100CA-DN

Communication module dual-port memory - DeviceNet

Flexible communication module for automation

Active
More
COMXEB

comX Evaluation Board

Development platform for all comX types

Active
More