Hilscher netX microcontroller driver  V0.0.5.0
Documentation of the netX driver package
Data Structures | Enumerations | Functions
netx_drv_xpic.h File Reference

peripheral module driver. More...

#include "netx_drv.h"
#include <stdint.h>
#include <stdbool.h>
Include dependency graph for netx_drv_xpic.h:
This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Data Structures

struct  DRV_XPIC_WATCHPOINT_T
 

Enumerations

enum  DRV_XPIC_REG_E {
  DRV_XPIC_REG_R0 = 0,
  DRV_XPIC_REG_R1 = 1,
  DRV_XPIC_REG_R2 = 2,
  DRV_XPIC_REG_R3 = 3,
  DRV_XPIC_REG_R4 = 4,
  DRV_XPIC_REG_R5 = 5,
  DRV_XPIC_REG_R6 = 6,
  DRV_XPIC_REG_R7 = 7,
  DRV_XPIC_REG_USR0 = 8,
  DRV_XPIC_REG_USR1 = 9,
  DRV_XPIC_REG_USR2 = 10,
  DRV_XPIC_REG_USR3 = 11,
  DRV_XPIC_REG_USR4 = 12,
  DRV_XPIC_REG_PC = 13,
  DRV_XPIC_REG_STAT = 14,
  DRV_XPIC_REG_ZERO = 15
}
 

Functions

void DRV_XPIC_Reset (unsigned int uiXpicNo, void *pvUser)
 
void DRV_XPIC_Load (unsigned int uiXpicNo, const uint32_t *pulXpicPrg, void *pvUser)
 
void DRV_XPIC_Start (unsigned int uiXpicNo, void *pvUser)
 
void DRV_XPIC_StartEx (unsigned int uiXpicNo, bool fSinglestep, bool fMonitor, bool fIntDis, bool fMisalignHold, void *pvUser)
 
void DRV_XPIC_Stop (unsigned int uiXpicNo, void *pvUser)
 
void DRV_XPIC_SetBankSelect (unsigned int uiXpicNo, bool fSel, bool fFiqBank)
 
uint32_t DRV_XPIC_GetLastPc (unsigned int uiXpicNo)
 
uint32_t DRV_XPIC_GetIrqStatus (unsigned int uiXpicNo)
 
uint32_t DRV_XPIC_GetIrqReturnPc (unsigned int uiXpicNo)
 
uint32_t DRV_XPIC_GetFiqReturnPc (unsigned int uiXpicNo)
 
uint32_t DRV_XPIC_GetBreakStatus (unsigned int uiXpicNo)
 
uint32_t DRV_XPIC_GetBreakIrqRaw (unsigned int uiXpicNo)
 
void DRV_XPIC_ConfirmBreakIrq (unsigned int uiXpicNo, uint32_t ulIrq)
 
uint32_t DRV_XPIC_GetBreakIrq (unsigned int uiXpicNo, bool fOwn)
 
void DRV_XPIC_EnableBreakIrq (unsigned int uiXpicNo, uint32_t ulIrq, bool fOwn)
 
void DRV_XPIC_DisableBreakIrq (unsigned int uiXpicNo, uint32_t ulIrq, bool fOwn)
 
void DRV_XPIC_SetupWatchPoint (unsigned int uiXpicNo, unsigned int uWpNo, DRV_XPIC_WATCHPOINT_T *ptWp)
 
uint32_t DRV_XPIC_GetReg (unsigned int uiXpicNo, DRV_XPIC_REG_E eReg)
 
void DRV_XPIC_SetReg (unsigned int uiXpicNo, DRV_XPIC_REG_E eReg, uint32_t ulValue)
 
void DRV_XPIC_WrDramDw (unsigned int uiXpicNo, unsigned int uiOffset, uint32_t ulValue)
 
uint32_t DRV_XPIC_RdDramDw (unsigned int uiXpicNo, unsigned int uiOffset)
 
void DRV_XPIC_WrPramDw (unsigned int uiXpicNo, unsigned int uiOffset, uint32_t ulValue)
 
uint32_t DRV_XPIC_RdPramDw (unsigned int uiXpicNo, unsigned int uiOffset)
 

Detailed Description

peripheral module driver.

Revision
4646
Date
2018-12-19 08:47:36 +0100 (Mi, 19 Dez 2018)
Copyright
Copyright (c) Hilscher Gesellschaft fuer Systemautomation mbH. All Rights Reserved.
Note
Exclusion of Liability for this demo software: The following software is intended for and must only be used for reference and in an evaluation laboratory environment. It is provided without charge and is subject to alterations. There is no warranty for the software, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other parties provide the software "as is" without warranty of any kind, either expressed or implied. Please refer to the Agreement in README_DISCLAIMER.txt, provided together with this file! By installing or otherwise using the software, you accept the terms of this Agreement. If you do not agree to the terms of this Agreement, then do not install or use the Software!

Definition in file netx_drv_xpic.h.