netx_drv_cortex.h File Reference

Header file of CORTEX module. More...

#include "netx_drv.h"

Include dependency graph for netx_drv_cortex.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

Functions
void	DRV_NVIC_SetPriorityGrouping (uint32_t PriorityGroup)
	This method sets the priority grouping. More...
uint32_t	DRV_NVIC_GetPriorityGrouping (void)
	This function returns the priority grouping. More...
void	DRV_NVIC_SetPriority (IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
	This method sets the priority of a given interrupt. More...
void	DRV_NVIC_GetPriority (IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
	This method stores the priority of a given interrupt and group into the given locations. More...
void	DRV_NVIC_EnableIRQ (IRQn_Type IRQn)
	This method enables a given interrupt. More...
void	DRV_NVIC_DisableIRQ (IRQn_Type IRQn)
	This method disables a given interrupt. More...
__STATIC_INLINE int	DRV_IRQ_Enable (void)
	This is a semaphore function for nested enabling the interrupts. More...
__STATIC_INLINE int	DRV_IRQ_Disable (void)
	This is a semaphore function for nested disabling the interrupts. More...
void	DRV_NVIC_SystemReset (void)
	This method resets the NVIC and the Cortex M4 internal registers and restarts the PC at 0. More...
uint32_t	DRV_NVIC_GetPendingIRQ (IRQn_Type IRQn)
	This funciton returns the pending state of a given interrupt. More...
void	DRV_NVIC_SetPendingIRQ (IRQn_Type IRQn)
	This method sets a given interrupt pending. More...
void	DRV_NVIC_ClearPendingIRQ (IRQn_Type IRQn)
	This method clears the pending state of a given interrupt. More...
uint32_t	DRV_NVIC_GetActive (IRQn_Type IRQn)
	This function returns the active state of a given interrupt. More...
uint32_t	DRV_NVIC_GetEnableIRQ (IRQn_Type IRQn)
	This function returns the enable state of a given interrupt. More...
void	DRV_NVIC_AttachIRQ (IRQn_Type IRQn, void *pfIRQHandler)
	This function may be used to attach or detach an interrupt to the software vector if it is used. More...
void *	DRV_NVIC_GetIRQ (IRQn_Type IRQn)
	This function may be used to get the pointer of an interrupt. More...
int32_t	DRV_ITM_ReceiveChar (void)
	Driver wrapper for ITM Receive Character. More...
int32_t	DRV_ITM_CheckChar (void)
	Driver wrapper for ITM Check Character. More...
uint32_t	DRV_ITM_SendChar (uint32_t ch)
	Driver wrapper for ITM Send Character. More...

Variables
int	ulIrqSemaphore
	Semaphore value for nested enabling/disabling of all interrupts. More...

Detailed Description

Header file of CORTEX module.

Revision

6251

Date

2019-10-07 09:27:10 +0200 (Mo, 07 Okt 2019)

Copyright

Copyright (c) Hilscher Gesellschaft fuer Systemautomation mbH. All Rights Reserved.

Note

Exclusion of Liability for this demo software: The following software is intended for and must only be used for reference and in an evaluation laboratory environment. It is provided without charge and is subject to alterations. There is no warranty for the software, to the extent permitted by applicable law. Except when otherwise stated in writing the copyright holders and/or other parties provide the software "as is" without warranty of any kind, either expressed or implied. Please refer to the Agreement in README_DISCLAIMER.txt, provided together with this file! By installing or otherwise using the software, you accept the terms of this Agreement. If you do not agree to the terms of this Agreement, then do not install or use the Software!

Definition in file netx_drv_cortex.h.