Logo Hilscher

Technologies

    Gateway Open Modbus/TCP to Open Modbus/TCP

    High-End Gateway for demanding conversions

    Product Image

     

    NT 100-RE-EN-Image

    NT 100-RE-EN

    Active

    At a glance

    • Simplest, transparent data conversion as dual client/server
    • Flexible use of Modbus TCP as Client or Server
    • Shortest I/O data conversion time lower than 10 ms
    • Device replacement in seconds via memory card based loading
    • Loadable firmware for flexible use of other conversions
    • With USB diagnostic and configuration port

    Weitere Informationen

    Description

    netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

    A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

    Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

    Technical Details

    ProductProduct nameNT 100-RE-EN
    Part number1712.110
    Brief descriptionGateway Real-Time-Ethernet to Ethernet
    Communication controllernetXnetX 100
    Integrated MemoryRAM8 MB SDRAM
    FLASH4 MB serial Flash
    Memory cardType and sizeSD or MMC card, max. 2 GByte
    Power supplySupply voltage24 V DC ± 6 V
    Maximum Current at 24 V (typically)130 mA
    Typical power consumption3,2 W
    ConnectorMini-COMBICON, 2-pin
    Reverse voltage protectionyes
    Requirement to the power supplyFor UL conform usage: Device shall be supplied by an isolated voltage source
    Communication interface 1Communication standardEthernet
    Interface type100BASE-TX or 10BASE-T, isolated
    Connector2 * RJ45
    Communication interface 2Communication standardEthernet
    Interface type100BASE-TX or 10BASE-T, isolated
    Connector1 * RJ45
    Diagnostic interfaceTypeUSB
    ConnectorMini-USB, 5-pin
    DisplaysLED displaysSYS System status
    APL Application status
    COM Communication status
    LINK Link, ACT Activity
    Permitted ambient conditionsAmbient temperature (operation)0 … + 60 °C
    Humidityno condensation permitted
    Pollution degreeFor UL-compliant usage: Device must be used in a pollution degree 2 environment
    DeviceDimensions (L x W x H)100 x 52 x 70 mm (without connector)
    Weightappr. 150 g
    Degree of protectionIP 20
    Mountingon DIN rail EN 60715
    ConformityRoHSYes
    UL certificationULThe device is UL 508 certified
    UL fileUL-File No E334100
    Conformance with EMC directivesCE signYes
    EmissionCISPR 11 Class A
    ImmunityEN 61131-2:2003

    Ordering information

    Product name Part number Brief description
    NT 100-RE-EN1712.110Gateway Open Modbus/TCP to Open Modbus/TCP

    Alternative Product

    Product name Part number Brief description
    NT 151-RE-RE1722.122Gateway Real-Time Ethernet Slave to Real-Time Ethernet SlaveShow product

    netTAP 100 is the protocol converter for sophisticated conversions and, in addition to serial/fieldbus to two port Real-Time Ethernet conversions, it also supports fieldbus to fieldbus conversions It supports slave and master functionality in any combination. There are no restrictions on the master functionality which requires a master license.

    Reduce the range of devices with the following protocol filters