• CANopen
  • DeviceNet

Gateway DeviceNet Slave to CANopen Slave

High-End Gateway for demanding conversions

Product Image


NT 100-DN-CO-Image

NT 100-DN-CO


At a glance

  • Transparent data conversion in dual slave operation mode
  • I/O data individually mapable
  • Shortest I/O data conversion time lower than 10 ms
  • Device replacement in seconds via memory card based loading
  • Loadable firmware for flexible use of other conversions
  • With USB diagnostic and configuration port

Weitere Informationen


netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.

Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.

Technical Details

ProductProduct nameNT 100-DN-CO
Part number1717.160
Brief descriptionGateway DeviceNet to CANopen
Communication controllernetXnetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Memory cardType and sizeSD or MMC card, max. 2 GByte
Power supplySupply voltage24 V DC ± 6 V
Maximum Current at 24 V (typically)130 mA
Typical power consumption3,2 W
ConnectorMini-COMBICON, 2-pin
Reverse voltage protectionyes
Requirement to the power supplyFor UL compliant usage: Device shall be supplied by an isolated voltage source
Communication interface X2Communication standardDeviceNet
Interface typeISO 11898, optically isolated
ConnectorCOMBICON, 5-pin
Communication interface X3Communication standardCANopen
Interface typeISO 11898, optically isolated
ConnectorD-Sub, male, 9-pin
Diagnostic interfaceTypeUSB
ConnectorMini-USB, 5-pin
DisplaysLED displaysSYS System status
APL Application status
MNS Module/ Network Status Duo LED red/green
CAN Communication status Duo LED red/green
Operating elementsNetwork addressNetwork address, 2 rotary switches
Permitted ambient conditionsAmbient temperature (operation)0 … + 60 °C
Humidityno condensation permitted
Altitude0 … 2000 m
Pollution degreeFor UL-compliant usage: Device must be used in a pollution degree 2 environment
DeviceDimensions (L x W x H)100 x 52 x 70 mm (without connector)
Weightappr. 150 g
Degree of protectionIP 20
Mountingon DIN rail EN 60715
ConfigurationConfiguration softwareSYCON.net
UL certificationULThe device is UL 508 certified
UL fileUL-File No E334100
Conformance with EMC directivesCE signYes
UKCA signYes
EmissionCISPR 11 Class A
ImmunityEN 61131-2 / BS EN 61131-2
Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Air discharge method)±8 kV Criterion B
Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method)±4 kV Criterion A
Fast transient interferences (Burst), according to EN 61000-4-4 / BS EN 61000-4-4±2 kV Criterion B
Surge voltage, according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines)±1 kV Criterion B

Ordering information

Product namePart numberBrief description
NT 100-DN-CO1717.160Gateway DeviceNet Slave to CANopen Slave

netTAP 100 is the protocol converter for sophisticated conversions and, in addition to serial/fieldbus to two port Real-Time Ethernet conversions, it also supports fieldbus to fieldbus conversions It supports slave and master functionality in any combination. There are no restrictions on the master functionality which requires a master license.

Reduce the range of devices with the following protocol filters