Active
netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality in any combination. Master functionality is unrestricted when licensed.
A memory card slot allows the user to save firmware and configuration data on a removable card. In case of failure all that is necessary to bring the plant back on line within seconds is to move the memory card from the old netTAP 100 onto a spare unit.
Apart from standard protocols, netTAP 100 supports the creation of serial protocols with the Lua-based scripting language netSCRIPT. A full featured development environment is included within the delivery. It allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data pre-processing during the conversion into the other field protocol.
| Product | Product name | NT 100-CO-RS |
| Part number | 1716.100 | |
| Brief description | Gateway CANopen to RS-232/422/485 | |
| Communication controller | netX | netX 100 |
| Integrated Memory | RAM | 8 MB SDRAM |
| FLASH | 4 MB serial Flash | |
| Memory card | Type and size | SD or MMC card, max. 2 GByte |
| Power supply | Supply voltage | 24 V DC ± 6 V |
| Maximum Current at 24 V (typically) | 130 mA | |
| Typical power consumption | 3,2 W | |
| Connector | Mini-COMBICON, 2-pin | |
| Reverse voltage protection | yes | |
| Requirement to the power supply | For UL conform usage: Device shall be supplied by an isolated voltage source | |
| Communication interface 1 | Communication standard | CANopen |
| Interface type | ISO 11898, optically isolated | |
| Connector | D-Sub, male, 9-pin | |
| Communication interface 2 | Communication standard | Serial Interface |
| Interface type | RS-232, RS-422, RS-485 | |
| Connector | D-Sub, male, 9-pin | |
| Diagnostic interface | Type | USB |
| Connector | Mini-USB, 5-pin | |
| Displays | LED displays | SYS System status |
| APL Application status | ||
| COM Communication status | ||
| LINK Link, ACT Activity | ||
| Operating elements | Network address | Network address, 2 rotary switches |
| Permitted ambient conditions | Ambient temperature (operation) | 0 … + 60 °C |
| Humidity | no condensation permitted | |
| Pollution degree | For UL-compliant usage: Device must be used in a pollution degree 2 environment | |
| Device | Dimensions (L x W x H) | 100 x 52 x 70 mm (without connector) |
| Weight | appr. 150 g | |
| Degree of protection | IP 20 | |
| Mounting | on DIN rail EN 60715 | |
| Conformity | RoHS | Yes |
| UL certification | UL | The device is UL 508 certified |
| UL file | UL-File No E334100 | |
| Conformance with EMC directives | CE sign | Yes |
| Emission | CISPR 11 Class A | |
| Immunity | EN 61131-2:2003 |
| Product name | Part number | Brief description |
|---|---|---|
| NT 100-CO-RS | 1716.100 | Gateway CANopen Slave to Serial (programmable) |
netTAP 100 is the protocol converter for sophisticated conversions and, in addition to serial/fieldbus to two port Real-Time Ethernet conversions, it also supports fieldbus to fieldbus conversions It supports slave and master functionality in any combination. There are no restrictions on the master functionality which requires a master license.
Reduce the range of devices with the following protocol filters
