• PROFINET
  • Serial

Gateway Serial (ASCII) to PROFINET IO Device

Cost-optimized entry level Gateway for simple conversions

Product Image

 

NT 50-RS-EN-Image

NT 50-RS-EN

Active

At a glance

  • Transmits ASCII frames from/to a PROFINET IO Controller
  • Configureable ASCII send/receive character string
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port

Weitere Informationen

Description

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

Technical Details

ProductProduct nameNT 50-RS-EN
Part number1750.110
Brief descriptionGateway RS-232/422/485 to Ethernet
Communication controllerCommunication controllernetX 50
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Power supplySupply voltage24 V ± 6 V DC
Current consumption at 24 V (typically)72 mA
Connector typeMini-COMBICON, 2-pin
Communication interface X2Communication interfaceSerial Interface
Interface typeRS-232, RS-422, RS-485
Connector typeRJ45, Ethernet and serial interface together in one connector
Communication interface X3Communication interfaceEthernet
Interface type10BASE-T/100BASE-TX, isolated
Connector type1 * RJ45
Diagnostic interfaceTypeEthernet, 4-pin
Connector typeRJ45 socket
DisplayLED displaysSYS System status
APL Application status
COM Communication status
LINK Link, ACT Activity
Permitted ambient conditionsAmbient temperature (operation)0 °C … +60 °C
Ambient temperature (storage)-40 °C … +85 °C
Relative humidity10 % … 95 %, non-condensing
Altitude0 m … 2000 m
DeviceDimensions (L x W x H)100 x 26 x 66 mm (without connector)
Weightappr. 80 g
Degree of protectionIP 20
Mounting typeon DIN rail EN 60715
ConfigurationConfiguration softwareSYCON.net
ConformityRoHSYes
Conformance with EMC directivesCE signYes
UKCA signYes
EmissionEN 55011 / BS EN 55011
ImmunityEN 61131-2 / BS EN 61131-2

Ordering information

Product namePart numberBrief description
NT 50-RS-EN1750.110Gateway RS-232/422/485 to Ethernet

netTAP 50 is a protocol converter for simple conversions. It supports conversions from and to one port Real-Time Ethernet, fieldbus and serial automation protocols. The conversion can be either slave to slave or slave to master. As a master, netTAP 50 provides full master functionality to one slave device only.