Active
netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.
The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.
Product | Product name | NT 50-CC-EN |
Part number | 1754.110 | |
Brief description | Gateway CC-Link Slave to Ethernet | |
Communication controller | Communication controller | netX 50 |
Integrated Memory | RAM | 8 MB SDRAM |
FLASH | 4 MB serial Flash | |
Power supply | Supply voltage | 24 V ± 6 V DC |
Current consumption at 24 V (typically) | 72 mA | |
Connector type | Mini-COMBICON, 2-pin | |
Communication interface 1 | Communication interface | CC-Link V2.0 and 1.1 |
Interface type | RS-485 | |
Connector type | COMBICON, 5-pin | |
Communication interface 2 | Communication interface | Ethernet |
Interface type | 100 BASE-TX or 10 BASE-T, isolated | |
Connector type | 1 * RJ45 | |
Diagnostic interface | Type | Ethernet, 4-pin |
Connector type | RJ45 socket | |
Display | Display 1 | SYS System status |
Display 2 | APL Application status | |
Display 3 | COM Communication status | |
Display 4 | LINK Link, ACT Activity | |
Permitted ambient conditions | Ambient temperature (operation) | 0 … +60 °C |
Relative humidity (operation) | no condensation allowed | |
Device | Dimensions (L x W x H) | 100 x 26 x 66 mm (without connector) |
Weight | appr. 80 g | |
Degree of protection | IP 20 | |
Mounting type | on DIN rail EN 60715 | |
Configuration | Configuration software | SYCON.net |
Conformity | RoHS | Yes |
Conformance with EMC directives | CE sign | Yes |
Emission | CISPR 11 Class A | |
Immunity | EN 61131-2:2003 |
Product name | Part number | Brief description |
---|---|---|
NT 50-CC-EN | 1754.110 | Gateway CC-Link Slave to Ethernet |
netTAP 50 is a protocol converter for simple conversions. It supports conversions from and to one port Real-Time Ethernet, fieldbus and serial automation protocols. The conversion can be either slave to slave or slave to master. As a master, netTAP 50 provides full master functionality to one slave device only.