Logo Hilscher

Technologies

  • CC-Link
  •  

netRAPID Evaluation Board - CC-Link Slave

Product Image

 

NRPEB 10-CCS-Image

NRPEB 10-CCS

Active

At a glance

  • Easy evaluation of netRAPID technology
  • Incl. CC-Link slave firmware in limited version
  • Incl. 3 pieces NRP 10-CCS for prototyping
  • Incl. all tools and documentation for evaluation
  • Host connection via Dual-Port Memory or SPI

Weitere Informationen

Description

netX Chip-Carrier for integrated communication

The network technology in automation devices from medium to high volumes is typically integrated with a chip solution, such as the flexible multiprotocol chip netX. The complete development of the communication interface is thereby carried out by the customer from scratch. Low costs per unit are opposed to development risk, increased development time and necessary in-house knowledge.

The rapid and secure alternative to in-house development is netRAPID.

netX Chip-Carrier is a solution that offers adequate costs per unit as well as reduced risk and fast time-to-market. netRAPID is a complete netX-based communication interface and contains all necessary operating components. The 32 x 32 mm compact netX carrier will be soldered to the baseboard - by hand or SMD production process. You only need to add network interface, LEDs and address switches. A simple 2-layer baseboard is sufficient.

Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.

Technical Details

ProductNRPEB
Part number7600.740
Brief descriptionEvaluation board including NRP 10-CCS
Power supply and currentSupply voltage24 V DC ± 6 V
Maximum current (typically)55 mA (at 24 V)
Power consumption (typical)1.3 W
Host interfaceTypeParallel dual-port memory or serial dual-port memory (SPI)
Connector68-pin (X1) or 40-pin (X2)
Communication interfaceCommunication standardCC-Link
ConnectorCOMBICON, male, 5-pin
Diagnostic interfaceTypeUSB or UART
ConnectorUSB: Mini-B, UART: Pin header
DisplayLED displaysSYS System status
COM0, COM1 Communication status
GPIO Status
Operating elementsNetwork addressAddress switch (*1), (*10)
Baud rateBaud rate switch
Push buttonsReset push button, serial boot mode push button
Permitted ambient conditionsAmbient temperature range for operation0 … +70 °C, at an airflow of 0.5 m/s
DeviceDimensions (L x W x H)100 mm x 65 mm x 12 mm
Weightapprox. 45 g

Ordering information

Product name Part number Brief description
NRPEB 10-CCS7600.740netRAPID Evaluation Board - CC-Link Slave

Accessories

Product name Part number Brief description
NRPLFW-CCS7601.740netRAPID Loadable Firmware - CC-Link SlaveShow product
NXPCA-PCI7902.100netX PCI adapter board

netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. Since the netX chip carrier is the size of a stamp, it is integrated into the customer hardware in the same manner as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.