Active
Real-Time-Ethernet solution on minimum footprint
netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.
neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.
Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.
Product | Product name | NRPEB |
Part number | 7600.200 | |
Brief description | Evaluation board including NRP 52-RE | |
Power supply and current | Supply voltage | 24 V DC ± 6 V |
Maximum current (typically) | 100 mA (at 24 V) | |
Power consumption (typical) | 2.4 W | |
Host interface | Type | Parallel dual-port memory or serial dual-port memory (SPI) |
Connector | 68-pin (X1) or 40-pin (X2) | |
Communication interface | Communication standard | Ethernet |
Connector | 2x RJ45 | |
Diagnostic interface | Type | USB or UART, the support of the diagnostic interface depends on the loaded firmware |
Connector | USB: Mini-B, UART: Pin header | |
Display | LED displays | SYS System status |
COM0, COM1 Communication status | ||
GPIO Status | ||
Operating elements | Network address | Adressschalter (*1), (*10), not supported by standard firmware |
Push buttons | Reset push button, serial boot mode push button | |
Permitted ambient conditions | Ambient temperature range for operation | -20 … +70 °C, at an airflow of 0.5 m/s |
Device | Dimensions (L x W x H) | 100 mm x 65 mm x 12 mm |
Weight | approx. 45 g |
Product name | Part number | Brief description |
---|---|---|
NRPEB 52-RE | 7600.200 | netRAPID Evaluation Board - Real-Time Ethernet |
Product name | Part number | Brief description | |
---|---|---|---|
NXPCA-PCI | 7902.100 | netX PCI adapter board | |
NRPLFW-PNS | 7601.850 | netRAPID 51/52 Loadable Firmware - PROFINET IO Device | NRPLFW-PNS |
NRPLFW-ECS | 7601.120 | netRAPID 51/52 Loadable Firmware - EtherCAT Slave | NRPLFW-ECS |
NRPLFW-S3S | 7601.160 | netRAPID 51/52 Loadable Firmware - Sercos Slave | NRPLFW-S3S |
NRPLFW-EIS | 7601.830 | netRAPID 51/52 Loadable Firmware - EtherNet/IP Adapter | NRPLFW-EIS |
NRPLFW-PLS | 7601.180 | netRAPID 51/52 Loadable Firmware - POWERLINK Controlled Node | NRPLFW-PLS |
NRPLFW-VRS | 7601.810 | netRAPID 51/52 Loadable Firmware - VARAN Client | NRPLFW-VRS |
netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. Since the netX chip carrier is the size of a stamp, it is integrated into the customer hardware in the same manner as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.
Find all our current Media to Embedded Modules at our Media Archive.