Logo Hilscher

Technologies

  • Varan
  •  

netX Chip carrier - VARAN Client

Ready-to-solder netX Design in stamp size

Product Image

 

NRP 52-RE-Image

NRP 52-RE (TRAY)

Active

At a glance

  • Rapid alternative to an own development
  • Complete Slave interface with smallest footprint
  • Prototyping or SMD series production
  • One hardware for all Real-Time Ethernet systems
  • Host connection via Dual-Port Memory or SPI
  • Combines advantages of an ASIC with the benefits of a Module

Weitere Informationen

Description

Real-Time-Ethernet solution on minimum footprint

netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.

neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.

Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.

Technical Details

ProductProduct nameNRP 52
Part number7670.100
Brief descriptionChip carrier with Ethernet interface
Network controllernetXnetX 52
Integrated MemoryRAM4 MB serial Flash EPROM
Power supply and currentSupply voltage+3,3 V DC ± 5 %
Maximum current (typically)520 mA/600 mA (at 3,3 V)
Power consumption (typical)1.8 W
Host interfaceTypeParallel dual-port memory or serial dual-port memory (SPI, mode 3)
Connector76-pin solder contacts 1 mm with 1.5 mm grid
Dual-port memory size16 KB (14 address lines)
Width for the data access to the dual-port memory (DPM)8 or 16 bit
Baud rate (serial dual-port memory)Max. 50 MHz
Communication interfaceCommunication standardEthernet
Interface type100BASE-TX or 10BASE-T, isolated
Diagnostic interfaceTypeUSB or UART, the support of the diagnostic interface depends on the loaded firmware
ConnectorUSB or UART: Signals at Chip Carrier, available only if integrated in host system
DisplayLED displaysSYS System status
COM0, COM1 Communication status
2 x Link and 2 x Activity
Permitted ambient conditionsAmbient temperature range for operation-20 … +70 °C (at an airflow of 0.5 m/s)
DeviceDimensions (L x W x H)32 mm x 32 mm x 4 mm
Weightapprox. 4 g
Conformance with EMC directivesEmissionEN 55011:2009 + A1:2010 Class B (Conducted), A (Radiated)
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Contact discharge method)6 kV Criterion A
Radiated RF, according to IEC/EN 61000-4-3 and IEC/ EN 55011 80-1000MHz, 10V/m, 80% AM / 1kHzClass A
Radiated RF, according to IEC/EN 61000-4-3:2006 1.0-2.7 GHz, 10V/m, 80% AM / 1kHzClass A
Fast transient interferences (Burst), according to IEC/EN 61000-4-4:1995 (Communication and data lines)2.2 kV Criterion B
Surge voltage, according to IEC/EN 61000-4-5:1995 (Communication and data lines)1 kV Criterion B
Conducted RF, according to IEC/EN 61000-4-6:2009 0,15-80 MHz, 80% AM / 1kHzClass A

Ordering information

Product name Part number Brief description
NRP 52-RE (TRAY)7672.100netX Chip carrier - VARAN Client

Accessories

Product name Part number Brief description
NRPEB 52-RE7600.200netRAPID Evaluation Board - Real-Time EthernetNRPEB 52-RE
NXPCA-PCI7902.100netX PCI adapter board
NRPLFW-PNS7601.850netRAPID Loadable Firmware - PROFINET IO DeviceNRPLFW-PNS
NRPLFW-ECS7601.120netRAPID Loadable Firmware - EtherCAT SlaveNRPLFW-ECS
NRPLFW-S3S7601.160netRAPID Loadable Firmware - Sercos SlaveNRPLFW-S3S
NRPLFW-EIS7601.830netRAPID Loadable Firmware - EtherNet/IP AdapterNRPLFW-EIS
NRPLFW-PLS7601.180netRAPID Loadable Firmware - POWERLINK Controlled NodeNRPLFW-PLS
NRPLFW-OMB7601.860netRAPID Loadable Firmware - Open Modbus/TCPNRPLFW-OMB

netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. Since the netX chip carrier is the size of a stamp, it is integrated into the customer hardware in the same manner as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.