Logo Hilscher

Technologies

    netX Chip carrier - Open Modbus/TCP

    Ready-to-solder netX Design in stamp size

    Product Image

     

    NRP 52-RE-Image

    NRP 52-RE (TRAY)

    Active

    At a glance

    • Rapid alternative to an own development
    • Complete Slave interface with smallest footprint
    • Prototyping or SMD series production
    • One hardware for all Real-Time Ethernet systems
    • Host connection via Dual-Port Memory or SPI
    • Combines advantages of an ASIC with the benefits of a Module

    Weitere Informationen

    Description

    Real-Time-Ethernet solution on minimum footprint

    netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.

    neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.

    Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.

    Technical Details

    ProductProduct nameNRP 52
    Part number7670.100
    Brief descriptionChip carrier with Ethernet interface
    Network controllernetXnetX 52
    Integrated MemoryRAM4 MB serial Flash EPROM
    Power supply and currentSupply voltage+3,3 V DC ± 5 %
    Maximum current (typically)520 mA/600 mA (at 3,3 V)
    Power consumption (typical)1.8 W
    Host interfaceTypeParallel dual-port memory or serial dual-port memory (SPI, mode 3)
    Connector76-pin solder contacts 1 mm with 1.5 mm grid
    Dual-port memory size16 KB (14 address lines)
    Width for the data access to the dual-port memory (DPM)8 or 16 bit
    Baud rate (serial dual-port memory)Max. 50 MHz
    Communication interfaceCommunication standardEthernet
    Interface type100BASE-TX or 10BASE-T, isolated
    Diagnostic interfaceTypeUSB or UART, the support of the diagnostic interface depends on the loaded firmware
    ConnectorUSB or UART: Signals at Chip Carrier, available only if integrated in host system
    DisplayLED displaysSYS System status
    COM0, COM1 Communication status
    2 x Link and 2 x Activity
    Permitted ambient conditionsAmbient temperature range for operation-20 … +70 °C (at an airflow of 0.5 m/s)
    DeviceDimensions (L x W x H)32 mm x 32 mm x 4 mm
    Weightapprox. 4 g
    Conformance with EMC directivesEmissionEN 55011:2009 + A1:2010 Class B (Conducted), A (Radiated)
    Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Contact discharge method)6 kV Criterion A
    Radiated RF, according to IEC/EN 61000-4-3 and IEC/ EN 55011 80-1000MHz, 10V/m, 80% AM / 1kHzClass A
    Radiated RF, according to IEC/EN 61000-4-3:2006 1.0-2.7 GHz, 10V/m, 80% AM / 1kHzClass A
    Fast transient interferences (Burst), according to IEC/EN 61000-4-4:1995 (Communication and data lines)2.2 kV Criterion B
    Surge voltage, according to IEC/EN 61000-4-5:1995 (Communication and data lines)1 kV Criterion B
    Conducted RF, according to IEC/EN 61000-4-6:2009 0,15-80 MHz, 80% AM / 1kHzClass A

    Ordering information

    Product name Part number Brief description
    NRP 52-RE (TRAY)7672.100netX Chip carrier - Open Modbus/TCP

    Accessories

    Product name Part number Brief description
    NRPEB 52-RE7600.200netRAPID Evaluation Board - Real-Time EthernetNRPEB 52-RE
    NXPCA-PCI7902.100netX PCI adapter board
    NRPLFW-PNS7601.850netRAPID Loadable Firmware - PROFINET IO DeviceNRPLFW-PNS
    NRPLFW-ECS7601.120netRAPID Loadable Firmware - EtherCAT SlaveNRPLFW-ECS
    NRPLFW-S3S7601.160netRAPID Loadable Firmware - Sercos SlaveNRPLFW-S3S
    NRPLFW-EIS7601.830netRAPID Loadable Firmware - EtherNet/IP AdapterNRPLFW-EIS
    NRPLFW-PLS7601.180netRAPID Loadable Firmware - POWERLINK Controlled NodeNRPLFW-PLS
    NRPLFW-OMB7601.860netRAPID Loadable Firmware - Open Modbus/TCPNRPLFW-OMB

    netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. Since the netX chip carrier is the size of a stamp, it is integrated into the customer hardware in the same manner as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.