Active
Real-Time-Ethernet solution on minimum footprint
netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. As stamp-sized netX chip carrier, it is integrated into the customer hardware in the same way as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.
neRAPID 52-RE is optimized for minimum space requirements. Means the 32 x 32 mm compact netX carrier contains all necessary operating components, such as magnetics, SQI flash and netX multi-protocol chip. Its focus is on Real-Time Ethernet communication and the protocol stack will be executed in the internal RAM of the netX. With netRAPID 52-RE the hardware development is reduced to only adding network connector and LEDs. A simple 2-layer baseboard is sufficient.
Full functionality of netRAPID is enabled via licensed firmware, which needs to be acquired once and loaded during manufacturing process.
| Product name | Part number | Brief description |
|---|---|---|
| NRP 52-RE (TRAY) | 7672.100 | netX 52 Chip-Carrier incl. Magnetics - CC-Link IE Field Basic Slave |
| Product name | Part number | Brief description | |
|---|---|---|---|
| NRPEB 52-RE | 7600.200 | netRAPID 52 Evaluation Board - Real-Time Ethernet | NRPEB 52-RE |
| NXPCA-PCI | 7902.100 | netX PCI adapter board | |
| NRPLFW-CCIBS | 7601.670 | netRAPID 51/52 Loadable Firmware - CC-Link IE Field Basic Slave | NRPLFW-CCIBS |
| NRPLFW-PNS | 7601.850 | netRAPID 51/52 Loadable Firmware - PROFINET IO Device | NRPLFW-PNS |
| NRPLFW-ECS | 7601.120 | netRAPID 51/52 Loadable Firmware - EtherCAT Slave | NRPLFW-ECS |
| NRPLFW-S3S | 7601.160 | netRAPID 51/52 Loadable Firmware - Sercos Slave | NRPLFW-S3S |
| NRPLFW-EIS | 7601.830 | netRAPID 51/52 Loadable Firmware - EtherNet/IP Adapter | NRPLFW-EIS |
| NRPLFW-OMB | 7601.860 | netRAPID 51/52 Loadable Firmware - Open Modbus/TCP | NRPLFW-OMB |
netRAPID is the rapid and secure alternative to developing your own slave using a communication controller. Since the netX chip carrier is the size of a stamp, it is integrated into the customer hardware in the same manner as a QFP part. It is designed for automated SMD series production as well as for rapid prototyping.
Find all our current Media to Embedded Modules at our Media Archive.