Logo Hilscher

Technologies

  • Varan
  •  

DIL-32 Communication IC - VARAN Client

Communication for simple slave devices without own host processor

Product Image

 

NIC_50-RE/NHS-Image

NIC 50-RE/NHS

Active mature

At a glance

  • Compact DIL-32 communication module for cost-efficient field devices
  • Modbus RTU protocol via SPI or UART to the host
  • One hardware for all Real-Time Ethernet systems
  • Direct I/O data transfer via external shift registers
  • Reduced height due to thermoconducting film
  • Heat dissipation directly via housing

Weitere Informationen

Description

Slave solution for field devices with a low data throughput

Simple field devices such as barcode readers, identification systems, valve manifolds or I/O blocks require a connection to fieldbus or Real-Time Ethernet systems.

The netIC is a complete ‘Single Chip Module’ in the compact dimensions of a Dual-In-Line (DIL) 32 pin plug-in module. It is based on the network controller netX and contains all components of a fieldbus or Real-Time Ethernet interface with an integrated 2-port switch and hub. With the netX technology the whole spectrum of relevant fieldbus and Real-Time Ethernet systems is covered. By exchanging the firmware, one single netIC can be used for multiple communication systems.

Conventional shifting registers can be controlled via a synchronous serial interface requiring no additional processor for a simple I/O-device.

Ordering information

Product name Part number Brief description
NIC 50-RE/NHS/VRS1541.101/VRSDIL-32 Communication IC without heatsink - VARAN Client

Accessories

Product name Part number Brief description
NICEB-RE1540.000netIC Evaluation Board - EtherCAT Slave;EtherNet/IP Adapter;Open Modbus/TCP Server;POWERLINK Controlled Node;PROFINET IO-Device;Sercos Slave;VARAN ClientShow product

netIC is the ideal slave solution for simple field devices with low data throughput. As a DIL-32 based communication IC, it reduces the integration into the customer hardware to a minimum. Data can either be directly transferred from the host to netIC via shift registers or via the well-known Modbus RTU protocol.