Logo Hilscher

Technologies

  • EtherCAT
  • Industrial Ethernet
  • EtherNet/IP
  • Modbus
  • POWERLINK
  • PROFINET
  • Sercos
  •  

netANALYZER real time Ethernet analyzer, box

Ethernet analysis made easy

Product Image

 

NANL-B500G-RE-Image

NANL-B500G-RE

Active

At a glance

  • Passive recording with zero-delay < 1 ns
  • Capture up to 4 Ethernet ports and 4 digital switching events
  • ± 5 ns measurement accuracy, 1 ns resolution
  • Detailed error information for each telegram

Weitere Informationen

Description

The netANALYZER is a tool for the simple analysis of Real-Time Ethernet networks. The scope of delivery includes a capture-hardware for recording the telegrams on the network as well as a graphical user software for Windows with extensive analysis functions. Of course, the netANALYZER hardware can also be used together with other analysis software such as Wireshark.

Using netANALYZER and the add-on software netANALYZER Scope you always have your Ethernet network at your fingertips. Measure important key figures such as process data, communication protocol events, network load or jitter without influence to network or PLC. Very simple, using the intuitive graphic interface with oscilloscope functions.

To narrow down to sporadic errors netANALYZER box supports autonomous operation without PC. Thus, one can record telegram traffic quickly in the automation floor by a simple touch of a button. With the help of the powerful trigger function the netANALYZER can remain in a plant for a period of time, allowing facilitated troubleshooting. On the occurrence of trigger events the netANALYZER automatically generates telegram snapshots that can be interpreted later using the netANALYZER Scope software.

Technical Details

ProductProduct nameNANL-B500G-RE
Part number7313.100
DescriptionnetANALYZER portable Device with Gigabit Ethernet PC interface for Real-Time Ethernet and all 10/100BASE-TX Ethernet Networks (Stand-alone Device).
FunctionPassive Ethernet analyzer for RT-Ethernet systems; analyzes the data in a communication link and captures the incoming Ethernet frames. Additionally, events of four digital inputs can be captured.
Power supply and currentSupply voltage24 V DC ±6 V DC
Maximum current (typically)700 mA (at 24 V)
Typical power consumption16.8 W
Power connectorCOMBICON, 3-pin, maximum permitted cable length: 3 m. Alternatively connector for barrel plug, maximum permitted cable length: 3 m. Only alternative use permitted!
System interfaceBus type/PC interfaceGigabit Ethernet RJ45 socket, required connection to the PC‚ UPLINK 1 Gb/s: Ethernet RJ45 socket (1 Port)
Recording interfaceUSB 2.0 (hard disc or memory stick), max. 500 mA or external supply
Autonomous operationdata rate approx. 50 % network load when recording on one TAP
Measurement interfaceConnector4 x RJ45 socket, channels/ports: 2/4 communication channels with integrated TAP (TAP A, TAP B), and each with two ports for capturing data in both directions (together 4 Ports: Port 0 to Port 3)
Digital signals4x GPIO In-/Output 3.3 V and 24 V for capturing digital signals or using as trigger output
Time stamp± 5 ns measurement accuracy, 1 ns resolution
Operating elementsSwitch/ButtonPower Switch, REC Button (Enables data recording)
Permitted ambient conditionsAmbient temperature range for operation0 °C ... +55 °C (Air flow during measurement: 0,5m/s)
Ambient temperature range for storage-10 °C ... +70 °C
Humidity range10 % … 95% relative humidity, no condensation permitted
Pollution degreeThe device must be used in a pollution degree 2 environment.
DeviceDimensions (L x W x H)115 x 62 x 173 mm
Weightapprox. 820 g
ConformityRoHSYes
Conformance with EMC directivesEmissionEN55011:2009 Class A; CISPR 11. Class A
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Air discharge method)± 8 kV, Criterion B
Electrostatic discharge (ESD) according to IEC/EN 61000-4-2:1995 (Contact discharge method)± 6 kV, Criterion B
Radiated RF, according to IEC/EN 61000-4-3:1995 80-1000 MHz, 10 V/m, 80 % AM / 1 kHzCriterion A
Radiated RF, according to IEC/EN 61000-4-3:1995 1.0-2.7 GHz, 10 V/m, 80 % AM / 1 kHzCriterion A
Fast transient interferences (Burst) according to IEC/EN 61000-4-4:1995 (Communication and data lines)± 2.2 kV, Criterion B
Surge voltage, according to IEC/EN 61000-4-5:1995 (Communication and data lines)1 kV, Criterion A
Conducted RF, according to IEC/EN 61000-4-6:1995 0,15-80 MHz, 10 V, 80 % AM / 1 kHzCriterion A

Ordering information

Product name Part number Brief description
NANL-B500G-RE7313.100Ethernet Analyzer Real-Time Ethernet

Accessories

Product name Part number Brief description
LIC/SCP8582.001Ethernet analysis made easyShow product
LIC/SCP/PN8582.030netANALYZER Scope add-on, PROFINET process data and eventsShow product
LIC/SCP/ECAT8582.040netANALYZER Scope add-on, EtherCAT process dataShow product
LIC/SCP/CVF8582.050netANALYZER Scope add-on, custom definable data contentShow product
LIC/SCP/PCAP8582.070netANALYZER Scope add-on, Import of frame records from other toolsShow product
LIC/NANL/SA8582.060NANL-B500G-RE add-on, autonomous operation without PCShow product
NANL-B500G-RE CASE7313.102Transport and storage of NANL-B500G-REShow product
NANL-B500G POWER SUPPLY7313.101netANALYZER box power supply

With the netANALYZER you will have the right Real-Time Ethernet analysis tool for every situation. It assists in examining the network load, jitter and delay times and provides an oscilloscope-like display of process values.