• EtherCAT
  • Ethernet
  • EtherNet/IP
  • Modbus TCP
  • Sercos

netANALYZER real time Ethernet analyzer, ExpressCard

Ethernet analysis made easy

Product Image



End of life

At a glance

  • Passive recording with zero-delay < 1 ns
  • Capture up to 4 Ethernet ports and 4 digital switching events
  • ± 5 ns measurement accuracy, 1 ns resolution
  • Detailed error information for each telegram

Weitere Informationen


The netANALYZER is a tool for the simple analysis of Real-Time Ethernet networks. The scope of delivery includes a capture-hardware for recording the telegrams on the network as well as a graphical user software for Windows with extensive analysis functions. Of course, the netANALYZER hardware can also be used together with other analysis software such as Wireshark.

Using netANALYZER and the add-on software netANALYZER Scope you always have your Ethernet network at your fingertips. Measure important key figures such as process data, communication protocol events, network load or jitter without influence to network or PLC. Very simple, using the intuitive graphic interface with oscilloscope functions.

Technical Details

ProductProduct nameNANL-B500E-RE
Part number7311.100
DescriptionnetANALYZER portable Device with ExpressCard Interface for Real-Time Ethernet and all 10/100BASE-TX Ethernet Networks (Stand-alone Device)
FunctionPassive Ethernet analyzer for RT-Ethernet systems; analyzes the data in a communication link and captures the incoming Ethernet frames. Additionally, events of four digital inputs can be captured.
Communication ControllerTypenetX 500
Power supply and currentSupply voltage24 V DC ±6 V DC
Maximum current (typically)180 mA (at 24 V)
Typical power consumption4,3W
Power connectorCOMBICON, 3-pin, maximum permitted cable length: 3 m. Alternatively connector for barrel plug, maximum permitted cable length: 3 m. Only alternative use permitted!
System interfaceBus type/PC interfaceExpressCard 34, PCI Express Base Specification Revision 2.0 and PCI Express to PCI/PCI-X Bridge Specification Revision 1.0
Size of dual-port memory64 KByte
Measurement interfaceCommunication standardEthernet Communication
Connector4 x RJ45 socket, channels/ports: 2/4 communication channels with integrated TAP (TAP A, TAP B), and each with two ports for capturing data in both directions (together 4 Ports: Port 0 to Port 3)
DisplaysLED displaysSYS, System status
STA 0, sapturing active/inactive
STA 1, event signal detected
Ethernet Link status (green), Ethernet RX status (yellow)
Permitted ambient conditionsAmbient temperature range for operation0 °C ... +55 °C (Air flow during measurement: 0,5m/s)
Ambient temperature range for storage0 °C ... +70 °C
Humidity range10 % … 95% relative humidity, no condensation permitted
Pollution degreeThe device must be used in a pollution degree 2 environment.
DeviceDimensions (L x W x H)115 x 62 x 133 mm
Mounting/InstallationPCI Express Slot for notebook (ExpressCard), PCIe compatible

Ordering information

Product namePart numberBrief description
NANL-B500E-RE7311.100netANALYZER real time Ethernet analyzer, ExpressCard


Product namePart numberBrief description
LIC/SCP8582.001Ethernet analysis made easyShow product
LIC/SCP/PN8582.030netANALYZER Scope add-on, PROFINET process data and eventsShow product
LIC/SCP/ECAT8582.040netANALYZER Scope add-on, EtherCAT process dataShow product
LIC/SCP/CVF8582.050netANALYZER Scope add-on, custom definable data contentShow product
LIC/SCP/PCAP8582.070netANALYZER Scope add-on, Import of frame records from other toolsShow product




Software installation

User manual

Operating instruction manual



With the netANALYZER you will have the right Real-Time Ethernet analysis tool for every situation. It assists in examining the network load, jitter and delay times and provides an oscilloscope-like display of process values.