EU5C-SWD-SERCOS
Active

Gateway Sercos Slave to SmartWire-DT

SmartWire-DT connectivity to Real-Time Ethernet Sercos systems

  • Transparent I/O data mapping of a SmartWire-DT trunk into Sercos

  • Featuring full range of 99 SmartWire-DT stations per trunk

  • Rapid pushbutton-based SmartWire commissioning

  • Effortless SERCOS Master commissioning per Bus Scan/SDDML file

Description
Technical Data
Order Information
Downloads

The gateway links a SmartWire-DT network trunk to a SERCOS network. As SERCOS slave, the device maps each SmartWire-DT station and its process data modularly in separate IO Function Groups. 252 bytes of I/O process data of up to 99 SWD stations stations can be transmitted, exchanged, and converted transparently between both networks.

The connected SWD trunk is commissioned with the configuration button at the front of the device. By pressing the button, the SWD topology read will be configured in the IO Function Groups and stored as a nominal configuration in the gateway. The SERCOS master is commissioned using SDDML device description files. They allow the user to adjust the actual and nominal configuration in the engineering software of the SERCOS master. Parameters of the SWD devices can also be set and transmitted to the devices via the gateway during the SERCOS network start phase.

SWD-Assist (Eaton’s planning and ordering tool) can be used optionally. It helps dimension the SWD trunk and allows further diagnosis in case of errors. SWD-Assist and the SDDML files are not included within the delivery of the gateway. You can download all software components free of charge at www.hilscher.com or order them at cost price as a DVD with a USB cable.

Category

Parameter

Value

General

Part number

9233.923

Dimensions
(W x H x D)

35 x 90 x 127 mm

Weight

160 g

Mounting

Top hat rail 35 mm (IEC/EN 60715)

Mounting position

Vertical

Standards

IEC/EN 61131-2

Communication controller

netX 50 processor

Configuration and diagnostic interface

Mini-USB

Integrated memory

8 MB SDRAM
4 MB serial Flash EPROM

Ambient mechanical conditions

Protection type
(IEC/EN 60529, EN50178, VBG 4)

IP20

Vibrations
(IEC/EN 61131-2:2008)

Constant amplitude 3.5 mm: 5 – 9 Hz
Constant acceleration 1 g: 9 – 150 Hz

Mechanical shock resistance
(IEC/EN 60068-2-27)

Semi-sinusoidal 15 g/11 ms: 9 Shocks

Drop to
(IEC/EN 60068-2-31)

Drop height: 50 mm

Free fall, packaged
(IEC/EN 60068-2-32)

Drop height: 1 m

Ambient climatic conditions

Operating ambient temperature
(IEC 60068-2)

-25…+55 °C

Condensation

Prevent by suitable measures

Storage

-40…+70 °C

Relative humidity, non-condensing
(IEC/EN 60068-2-30)

5…95 %

Electromagnetic compatibility (EMC)

Pollution degree

2

Electrostatic discharge
(IEC/EN 61131-2:2008)

Air discharge (Level 3): 8 kV
Contact discharge (Level 2): 4 kV

Electromagnetic fields (IEC/EN 61131-2:2008)

80 – 1000 MHz: 10 V/m
1.4 – 2 GHz: 3 V/m
2 – 2.7 GHz: 1 V/m

Radio interference suppression (SmartWire-DT)

EN 55011 Class A

Burst
(IEC/EN 61131-2:2008, Level 3)

Supply cables: 2 kV
Sercos bus cable: 1 kV
SmartWire-DT cables: 1 kV

Surge
(IEC/EN 61131-2:2008, Level 1)

Supply cables: 0.5 kV
Sercos bus cable: 1 kV

Radiated RFI
(IEC/EN 61131-2:2008, Level 3)

0,15 – 80 MHz, 10 V, 80% AM / 1 KHz

Supply voltage
UAUX

Rated operational voltage

24 V DC
-15 % +20 %

Input voltage residual ripple

≤ 5 %

Protection against polarity reversal

Yes

max. current Imax

3 A
Note: If contactors with a total power consumption > 3 A are connected, a power feeder module EU5C-SWD-PF1/2 has to be used.

Short-circuit strength

No, external fuse FAZ Z3

Heat dissipation

Typ. 1 W

Potential isolation

No

Rated operating voltage of 24-V-DC slaves

Typ. UAUX -0,2 V

Supply voltage
UPOW

Supply voltage

24 V DC
-15 % +20 %

Protection against polarity reversal

≤ 5 %

Protection against polarity reversal

Yes

Rated operational current I

111 mA (with two participants)

Heat dissipation at 24 V DC

2.66 W (with two participants)

Potential isolation between UPOW and 15-V-SmartWire-DT supply voltage

No

Bridging voltage dips

10 ms

Repeat rate

1 s

Status display

POW LED

SmartWire-DT supply voltage

Rated operational voltage Ue

15 V ± 3 %

max. current Imax

0.7 A
Note: If contactors with a total power consumption > 0.7 A are connected, a power feeder module EU5C-SWD-PF2 has to be used.

Short-circuit strength

Yes

Connection supply voltages

Connection type

Push-in terminals

solid

0,2 – 1,5 mm2 (AWG 24 – 16)

Flexible with ferrule

0,25 – 1,5 mm2

SmartWire-DT network

Participant type

SmartWire-DT master

SmartWire-DT Master ASIC

SWD-80P-RS485

Number of SmartWire-DT slaves

99

Baud rate

125 / 250 kBd

Address setting

Automatic

Status display

SmartWire-DT master: SWD LED, duo color red/green
Configuration: Config LED, duo color red/green

Connections

Plug, 8-pole

Plug connectors

Blade terminal SWD4-8MF2

Ethernet Sercos network

Function of gateway

Sercos Slave

Baud rate

100 MBit/s

Interface type

100 BASE-TX

Auto-Negotiation

Supported

Auto-Crossover

Supported

Address setting

By project configuration

Status display

Sercos LED: S,
duo color red/green (orange)

Connector socket

2 x RJ45

Connector plug

RJ45

Potential isolation

Yes

Product name

Part number

Brief description

EU5C-SWD-SERCOS

9233.923

Gateway Sercos Slave to SmartWire-DT

Download Software
Download Technical Documentation
Download Datasheet