NT 100-RE-CO
Active

Gateway Real-Time Ethernet to CANopen

High-end gateway for demanding conversions
  • Integrates a subordinate CANopen network trunk into a Real-Time Ethernet system, and vice versa

  • Master for up to 126 CANopen Nodes, 200 EtherCAT Slaves, 128 PROFINET IO-Devices, 64 EtherNet/IP Adapter, 511 Sercos Slaves

  • Shortest I/O data conversion period of less than 10 ms

  • Device exchange in seconds by loading via memory card

  • Loadable firmware for the flexible use of further conversions

  • With diagnosis and configuration interface via USB

netTAP 100 connects to communication networks and acts as a Gateway for sophisticated conversions between one Real-Time Ethernet protocol (2-port) and one fieldbus protocol or one serial automation protocol as well as between two fieldbus protocols as well as between one fieldbus protocol and one serial automation protocol. Licensed Master functionality is unrestricted.

A memory card slot allows the user to save firmware and configuration data on a removable card. In case of problems, the user can continue operation within a few seconds by removing the memory card from the netTAP 100 and connecting it to a spare unit.

Apart from standard protocols, netTAP 100 supports the programming of special serial protocols with the Lua-based scripting language netSCRIPT. A full-featured development environment (included within the delivery) allows the comfortable and rapid programming of any proprietary serial protocol as well as the I/O data preprocessing and further processing during the conversion into the secondary I/O field protocol.

Product

Product name

NT 100-RE-CO

Part number

1712.160

Brief description

Gateway Real-Time-Ethernet to CANopen

Communication controller

netX

netX 100

Integrated Memory

RAM

8 MB SDRAM

FLASH

4 MB serial Flash

Memory card

Type and size

SD or MMC card, max. 2 GByte

Power supply

Supply voltage

24 V DC ± 6 V

Maximum Current at 24 V (typically)

130 mA

Typical power consumption

3,2 W

Connector

Mini-COMBICON, 2-pin

Reverse voltage protection

yes

Requirement to the power supply

For UL compliant usage: Device shall be supplied by an isolated voltage source

Communication interface X2

Communication standard

Ethernet

Interface type

100BASE-TX or 10BASE-T, isolated

Connector

2 * RJ45

Communication interface X3

Communication standard

CANopen

Interface type

ISO 11898, optically isolated

Connector

D-Sub, male, 9-pin

Diagnostic interface

Type

USB

Connector

Mini-USB, 5-pin

Displays

LED displays

SYS System status

APL Application status

LINK Link LED green

ACT Activity LED yellow

CAN Communication status Duo LED red/green

Operating elements

Network address

Network address, 2 rotary switches

Permitted ambient conditions

Ambient temperature (operation)

0 … + 60 °C

Humidity

no condensation permitted

Pollution degree

For UL-compliant usage: Device must be used in a pollution degree 2 environment

Altitude

0 … 2000 m

Device

Dimensions (L x W x H)

100 x 52 x 70 mm (without connector)

Weight

appr. 150 g

Degree of protection

IP 20

Mounting

on DIN rail EN 60715

Configuration

Configuration software

SYCON.net

Conformity

RoHS

Yes

UL certification

UL

The device is UL 508 certified

UL file

UL-File No E334100

Conformance with EMC directives

CE sign

Yes

UKCA sign

Yes

Emission

CISPR 11 Class A

Immunity

EN 61131-2 / BS EN 61131-2

Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Air discharge method)

±8 kV Criterion B

Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method)

±4 kV Criterion B

Fast transient interferences (Burst), according to EN 61000-4-4 / BS EN 61000-4-4

±1 kV Criterion A

Surge voltage, according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines)

±1 kV Criterion A

Product name

Part number

Brief description

NT 100-RE-CO

1712.160

Gateway Real-Time Ethernet to CANopen

NXLIC-MASTER

8211.000

Master license