A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is an EtherNet/IP logo in blue and yellow.
empowering communication

    EtherNet/IP communication solutions by Hilscher

    Are you looking for a solution to develop EtherNet/IP compatible products and connect them to the EtherNet/IP network, or analyze industrial communications over EtherNet/IP? Hilscher provides reliable solutions for these various issues. Using embedded modules, PC cards, gateways, and network analyzers based on our original multi-protocol communication SoC “netX”, devices and machines can be reliably, flexibly connected, and processed.Hilscher is a member of the ODVA and supports networking technologies based on the Common Industrial Protocol (CIP), and our products comply with the latest standards in EtherNet/IP technology. Let the technology of the market leader take care of you!

    A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is an EtherNet/IP logo in blue and yellow.
    Chip Carrier communication module netRAPID 90
    Embedded module comX
    PC card cifX
    Gateway netTAP

    Chip Carrier communication module netRAPID 90 with netX 90 [Product Features]

    netRAPID 90 - compatible with EtherNet/IP

    • Ultra-compact embedded communication module with netX 90 IoT & industrial communication controller on a 15 x 32 mm board
    • Stand-alone or companion module available
    • Supports various industrial communication protocols with exchangeable firmware
    • Supports IoT/cloud communication functions such as OPC UA and MQTT
    NRP H90 (preloaded)

    netX 90 Chip Carrier - preloaded protocol stack

    Ultracompact netX 90 design - tested and loaded completely

    Active
    More
    NRP H90\F8D8 (preloaded)

    netX 90 Chip Carrier with an additional memory - preloaded protocol stack

    Ultracompact netX 90 design - tested and preloaded completely

    Active
    More
    NRPEB H90-RE

    netRAPID H90 Evaluation Board - Real-Time Ethernet & Fieldbus

    Equipped with an NRP H90-RE\F8D8

    Active
    More

    Embedded communication module comX

    comX - compatible with EtherNet/IP

    comX is a fully executable interface that implements the hardware and software required for EtherNet/IP communication in a single module. It can realize EtherNet/IP master and slave in a short period of time and at low cost with high performance.

    • Communication with the host is via parallel 8-bit/16-bit or SPI DPRAM access.
    • Complete runtime solution independent of host CPU and OS
    • Configuration tool (configurator) Communication Studio included
    • Easy driver development with C source function code collection (free of charge)
    COMX 51CN-RE

    Communication module SPI - Real-Time Ethernet Slave

    Flexible communication module for automation

    Active
    More
    COMX 51CA-RE

    Communication module SPI - Real-Time Ethernet Slave

    Flexible communication module for automation

    Active
    More
    COMX 100CA-RE

    Communication module dual-port memory - Real-Time-Ethernet

    Flexible communication module for automation

    Active
    More
    COMX 100CN-RE

    Communication module dual-port memory - Real-Time Ethernet

    Flexible communication module for automation

    Active
    More
    COMXEB

    comX Evaluation Board

    Development platform for all comX types

    Active
    More

      PC card cifX

      cifX – compatible with EtherNet/IP

      Master/Slave support
      Supports EtherNet/IP and 7 other real-time Ethernet protocols in the same hardware. Protocols can be freely interchanged.

      • Supports various PC form factors (PCI, PCI Express, low profile PCI Express, MiniPCI, Mini PCI Express, CompactPCI, PC/104, PCI104)
      • Included executable firmware and API for easy and quick application implementation
      • Configuration tool and OPC server also provided
      • Drivers for various OS (Windows, VxWorks, INtime, RTX, Linux, Win CE, QNX)
      CIFX 104C-RE-R\F

      PC card PCI-104 with a detached interface - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 70E-RE

      PC card low-profile PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 90E-RE\MR\F

      PC card with NVRAM Mini PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 90E-RE\F

      PC card Mini PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 50E-RE\ET

      PC card for extended temperature range PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 104C-RE

      PC card PCI-104 - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 104-RE\F

      PC card PC/104 with a detached interface - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 90-RE\F

      PC card Mini PCI - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 50E-RE

      PC card PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 104C-RE\F

      PC card PCI-104 with a detached interface - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX M3042100BM-RE\F

      PC card M.2 3042 Key B+M - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      AIFX-RE

      Detached network interface Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 104-RE

      PC card PC/104 - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      AIFX-RE\M12

      Detached network interface Real-Time Ethernet with M12 connectors

      Communication for PC-based automation

      Active
      More
      CIFX 90E-RE\MR\ET\F

      PC card with NVRAM and extended temperature range Mini PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 50-RE

      PC card PCI - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 90E-RE\NHS\F

      PC card without heat sink Mini PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 70E-RE\MR

      PC card with NVRAM low-profile PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 104-RE-R

      PC card PC/104 - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 80-RE

      PC card CompactPCI - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 104-RE-R\F

      PC card PC/104 with a detached interface - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX 90E-RE\ET\F

      PC card for extended temperature range Mini PCI Express - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX 104C-RE-R

      PC card PCI-104 - Real-Time Ethernet

      Communication for PC-based automation

      End of life
      More
      CIFX HPCIE90-RE\F

      PC card Mini PCI Express halfsize - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      AIFX-V2-RE

      Detached network interface Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX M223090AE-RE\F

      PC card M.2 2230 Key A+E - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More
      CIFX M224290BM-RE\F

      PC card M.2 2242 Key B+M - Real-Time Ethernet

      Communication for PC-based automation

      Active
      More

        Gateway netTAP

        netTAP, netHOST and netLINK – compatible with EtherNet/IP

        netTAP, netHOST and netLINK - compatible with EtherNet/IP, netTAP, netHOST and netLINK - easily exchange data between various industrial networks, including EtherNet/IP. More than 200 possible combinations of real-time Ethernet, fieldbus and serial are supported.

        • Secure network isolation with internal buffer
        • Switching of communication protocols by firmware replacement (netTAP 151)
        • Fast conversion within 10 ms (netTAP 100/151)
        • SD card for instant device replacement (netTAP 100/151)
        NT 50-CO-EN

        Gateway CANopen to Ethernet

        Cost-optimized entry level gateway for simple conversions

        Active
        More
        NHST-T100-EN/EIM

        Ethernet LAN EtherNet/IP Scanner

        LAN-controlled EtherNet/IP Scanner for the DIN rail

        Active
        More
        NT 100-RE-DN

        Gateway Real-Time Ethernet to DeviceNet

        High-end gateway for demanding conversions

        Active
        More
        NT 50-DP-EN

        Gateway PROFIBUS DP to Ethernet

        Cost-optimized entry level gateway for simple conversions

        Active
        More
        NT 151-RE-RE

        Gateway Real-Time Ethernet to Real-Time Ethernet

        Data transmission between two Real-Time Ethernet networks

        Active
        More
        NT 100-RE-RS

        Gateway Real-Time Ethernet to Modbus RTU, 3964R, or Serial (ASCII / programmable)

        High-end gateway for demanding conversions

        Active
        More
        NT 50-DN-EN

        Gateway DeviceNet to Ethernet

        Cost-optimized entry level gateway for simple conversions

        Active
        More
        NT 50-RS-EN

        Gateway Serial (ASCII) or Modbus RTU to Ethernet

        Cost-optimized entry level gateway for simple conversions

        Active
        More
        NT 100-RE-CC

        Gateway Real-Time Ethernet to CC-Link Slave

        High-end gateway for demanding conversions

        Active
        More
        NT 50-CC-EN

        Gateway CC-Link Slave to Ethernet

        Cost-optimized entry level gateway for simple conversions

        Active
        More
        NT 100-RE-EN

        Gateway Real-Time Ethernet to Ethernet

        High-end gateway for demanding conversions

        Active mature
        More
        NT 100-RE-DP

        Gateway Real-Time Ethernet to PROFIBUS DP

        High-end gateway for demanding conversions

        Active
        More
        NHST-T100-EN

        Ethernet LAN Real-Time Ethernet multiprotocol

        LAN-controlled Real-Time Ethernet Master for the DIN rail

        Active
        More
        NT 100-RE-CO

        Gateway Real-Time Ethernet to CANopen

        High-end gateway for demanding conversions

        Active
        More
        NS 90-RE-SPE

        SPE Media Switch

        Single Pair Ethernet conversion to Industrial Ethernet

        Active
        More

          Next-Generation, High-Performance ASICs

          netX 90” Ultra-compact IoT & Industrial Multifunctional Communication Controller
          Supports various industrial communication protocols by replacing firmware
          One-chip solution for 10mm square slaves

          Product Features

          • Arm® Cortex®-M4 100MHz x 2 cores (communication & application)
          • Built-in 1.5MB FLASH / 640KB SRAM
          • World's smallest class 10 x 10mm package
          • Single 3.3V power supply
          • 2 PHYs built-in
          Block Diagram netX 90
          netX 90 IoT & Industrial Network Controller
          A colorful block diagram of a netX 90 controller in light and dark blue. In the middle of the picture is a double-headed horizontal arrow.
          netX 90: Multiprotocol communication controller

            Application example in EtherNet/IP networks – netTAP gateway

            Learn more about netTAP at our netTAP information page!

            A yellow network line on top with an EtherNet/IP logo. Under the yellow line are three device icons in grey with a netTAP on the left side. The device are connected to the netTAP, while the netTAP itself is connected to the yellow network line.
            Example of master-to-slave communication (subordinate connection) configuration

            Do you need troubleshooting for your EtherNET/IP network? Use netANALYZER!

            • Four-channel Ethernet port for capturing two Ethernet data
            • Capable of simultaneous measurement at two locations
            • Capable of capturing Ethernet frame timestamps with 10ns resolution
            • Connects to a PC with Gigabit Ethernet port
            • Supports 9 real-time Ethernet types including PROFINET
            • Passive device without affecting the network or PLC
            • Automatically capture IO event signals with included software
            • Export of WinPcap files for use with Wireshark, the standard Ethernet analysis software
            • Optional extension software “netANALYZER Scope” for visualization of process data per protocol and data customization

            Go to the netANALYZER product page

            A netMIRROR and a netANALYZER on a colorful background. BOth devices are slightly mirrored on the bottom.

            Related links

            The flag of Japan in white with a large red dot in the middle.
            Hilscher Japan KK （ヒルシャー・ジャパン株式会社）

            Our industrial communication experts from Tokyo equip state-of-the-art production facilities in Japan with multiprotocol communication technology.

            Hilscher Japan KK
            Itchome Sanbankan Bldg.
            1-3-12 Shinjuku, Shinjuku-ku
            Tokyo, 160-0022
            Japan

            YKB Shinjuku-Gyoen Bldg.
            1-3-8 Shinjuku, Shinjuku-ku
            160-0022
            Tokyo
            Japan
            netX 90 communication controller mounted on a circuit board.
            netX: Technology Overview

            Overview of our netX communication controllers. As a highly integrated solution, they allow you to flexibly integrate your machines and production systems into your network regardless of the network standard. We provide hardware, software, certification and support from a single source.

            More
            A photo collage showcasing various Hilscher products
            Overview of communication solutions from Hilscher

            From turn-key products to highly integrated solutions and complementary software, Hilscher is your partner for industrial communication. Get an overview of how we can help you take the networking of your machines to a whole new level!

            More