netSHIELD 90-RE: New evaluation board for STM32 Nucleo 64 and Nucleo 144

Hattersheim, 16. Apr. 2025 – The Hilscher Gesellschaft für Systemautomation mbH has released the new evaluation board netSHIELD 90-RE for STM32-Nucleo applications. netSHIELD 90-RE is the successor to the established netSHIELD 52-RE and supports both Nucleo-64 and Nucleo-144 development boards from STMicroelectronics via the Arduino Uno host interface.
NSHIELD 90-RE allows the user to connect a microcontroller-based application to many relevant industrial communication networks:

  • PROFINET
  • Ethernet/IP
  • EtherCAT
  • CC-Link IE Field Basic
  • DeviceNet
  • Sercos
  • CANopen
 

Unlike the netSHIELD 52-RE, the new netSHIELD 90-RE is based on Hilscher's netX-90 system-on-chip (SoC), the smallest multiprotocol network controller on the market. In conjunction with the Nucleo-64 or Nucleo-144 board, the netX 90 is implemented as a companion chip to the STM32 processor.

The ARM-based netX 90 SoC architecture is designed from the ground up to meet the highest requirements for flexibility, determinism, and performance in terms of multiprotocol capability and low latency for short cycle times. The heterogeneous dual-core architecture features two ARM processor cores. One is dedicated to the communication side, which is fully covered by Hilscher along with the corresponding protocol firmware. This processor ensures the multiprotocol capability of the netX 90 through its flexible communication subsystem and can thus support all common industrial communication protocols.

The communication subsystem, i.e., the protocol stack, runs independently on the netX 90 SoC and requires only minimal memory and very limited CPU resources from the STM32 host microcontroller. A protocol-specific firmware image for the netX 90 network controller is stored in a serial flash memory. Thanks to an integrated crypto core, the netSHIELD 90-RE is also suitable for implementing upcoming cybersecurity functions.

The second ARM processor is exclusively available to the customer for their application implementation.

  • Integrated 8 MByte Serial Flash Memory, 8 MByte SDRAM
  • SPI host interface between customer host device like STM32 MCU and netX 90 companion chip
  • Two Ethernet ports (RJ45) with Real-Time Ethernet switch for line and ring topologies
  • Status and communication LEDs
  • Fieldbus module interface
  • As STM32 Nucleo expansion board with Arduino Uno compatible footprint
  • Power supply (5V) via Mini-B USB connector or host interface connector
  • Firmware download to the device via SPM host interface, webserver, or on-board USB with virtual COM port
  • On-board user peripherals: Reset button, boot mode selection
  • KiCad schematic and layout files as reference design
  • Firmware for evaluation (with limited functionality) is available from Hilscher as free download
  • Software expansion package for the STM32Cube™ IDE application examples available

Related links

NSHIELD 90-RE

평가 보드

활성
더 보기
10Mbit SPE 솔루션용 새로운 평가 보드

하터스하임, 2025. 2. 25.– Hilscher(Hilscher Gesellschaft für Systemautomation)는 자사의 싱글 페어 이더넷(SPE) 기술 포트폴리오에 새로운 평가 보드를 추가했습니다. NXEB-90-SPE 보드는 Hilscher의 멀티프로토콜 지원 디바이스 컨트롤러인 netX 90을 기반으로 하며, 사용자와 개발자에게 SPE를 활용하여 산업 애플리케이션을 개발하고 평가할 수 있는 다양한 옵션을 제공합니다.

더 보기
A photo of the male and female customer support phone operator with different internationality
Customer Center / Sales Hilscher Gesellschaft für Systemautomation mbH

You've got questions? We've got the answers!