Securing EtherNet/IP: CIP Security with netX 90
Four Reasons CIP Security Has Become So Important
1. Secure by Default
The CRA expects products to be delivered in a secure default state. For industrial devices, this is highly relevant because insecure default communication settings create risks long before a machine enters regular operation. ODVA points out that the CIP Security Pull Model supports this requirement by allowing devices to automatically obtain security-related configuration and certificates after deployment. The basic idea is simple: security should not depend on extensive manual intervention after commissioning. It should already be part of the initial device behavior.
2. Protection Against Unauthorized Access
A second key requirement is the protection against unauthorized access. In practice, this means that devices need mechanisms to verify who is allowed to communicate with them and under which conditions. According to ODVA, CIP Security addresses this through authentication methods based on certificates and pre-shared keys, using Mutual TLS (mTLS). For more advanced scenarios, additional user authentication and role-based access control can be integrated as well. This makes CIP Security relevant not only for encrypted traffic, but also for controlled access in industrial communication networks.
3. Confidentiality of Transmitted Data
In today’s existing automation systems, data confidentiality holds a lower priority than data reliability and deterministic behavior. That is changing. The CRA explicitly addresses the protection of transmitted data. CIP Security supports this by securing EtherNet/IP communication with TLS and DTLS with AES encryption, an established standard. This reduces the risk that communication can be read or intercepted on the network. Since CIP Security only secures data in transit ODVA explicitly stresses that encryption for stored data remains responsibility of the manufacturer.
4. Integrity of Transmitted Data
Confidentiality alone is not enough. Industrial communication also has to ensure that transmitted data remains unchanged and trustworthy. Commands, configuration data, and process values must arrive exactly as intended. CIP Security supports this requirement through integrity protection with TLS and DTLS, with all cipher suites defined by the EtherNet/IP extension. It is important to also mention here, that CIP Security applies to data in transit. Manufacturers remain responsible to ensure data integrity at rest.
What CIP Security Does Not Cover on Its Own
For all its importance, CIP Security should not be misunderstood as a shortcut to full CRA compliance. The CRA also requires vulnerability handling processes, technical documentation, end-user documentation, secure development practices, and mechanisms for updates and security advisories. In addition, every product needs its own cybersecurity risk assessment. The regulation does not support a one-size-fits-all interpretation.
This distinction is important for a realistic discussion. CIP Security helps manufacturers secure EtherNet/IP communication in key areas that matter for CRA readiness. It does not replace product-level responsibilities such as secure firmware updates, logging, incident handling, SBOM management, or product-specific threat assessment. A credible cybersecurity strategy for industrial devices therefore needs both: a secure communication layer and a structured product security process around it.
Implement CIP Security with netX
For developers and product managers the main question is: How can I implement CIP Security into my device? To answer this question in a practical approach, Hilscher has developed a CIP Security evaluation bundle for the EtherNet/IP Adapter firmware stack of the netX 90 communication controller.
The evaluation bundle is intended for customers and evaluators who want to:
- Explore CIP Security functionality on EtherNet/IP
- Evaluate configuration workflows and certificate handling
- Establish secure Class 1 and Class 3 communication
- Test interoperability with standard EtherNet/IP engineering tools
- Upgrade existing netX 90 devices to CIP Security (under certain prerequisites)
The package contains the firmware, supporting tools, documentation, and a demo application to help users to get started quickly.
Are you interested in getting started with EtherNet/IP? Get in touch with our team to explore your options.
Related links
Attacks on industrial systems are steadily increasing and becoming more sophisticated. At the same time, regulatory requirements like CRA and NIS 2 for secure operations and device protection are gaining traction. We help you operate your devices securely and prepare them for the future. Schedule a free consultation with our experts today!
Customer Center / Sales Hilscher Gesellschaft für Systemautomation mbH
You've got questions? We've got the answers!












