A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is a PROFINET logo in green.
empowering communication

PROFINET communication solutions by Hilscher

Are you looking for a solution to develop PROFINET compatible products, connect to a PROFINET network, or analyze industrial communications over PROFINET?  Hilscher provides reliable solutions for these various issues. Using embedded modules, PC cards, gateways, and network analyzers based on our original multi-protocol communication SoC “netX”, devices and machines can be reliably,flexibly connected, and processed. Hilscher is a member of PI (PROFIBUS & PROFINET International) and our products comply with the latest standards in PROFINET technology. Let the technology of the market leader take care of you!

A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is a PROFINET logo in green.

Chip Carrier Communication Module netRAPID 90 with netX 90 [Product Features]

netRAPID 90 – compatible with PROFINET

  • Ultra-compact embedded communication module with netX 90 IoT & industrial communication controller on a 15 x 32 mm board
  • Stand-alone or companion module available
  • Supports various industrial communication protocols with exchangeable firmware
  • Supports IoT/cloud communication functions such as OPC UA and MQTT

Chio Carrier netX 90 - stack di protocollo precaricato

Design netX 90 ultracompatto - testato e caricato completamente

Chip Carrier netX 90 con memoria aggiuntiva - stack di protocollo precaricato

Design netX 90 ultracompatto - testato e precaricato completamente

Scheda di valutazione netRAPID H90 - Real-Time Ethernet e bus di campo

Dotato di NRP H90-RE\F8D8

Embedded communication module comX

comX – compatible with PROFINET

comX is a fully executable interface that implements the hardware and software required for PROFINET communication in a single module. It can realize PROFINET master and slave in a short period of time and at low cost with high performance.

  • Communication with the host is via parallel 8-bit/16-bit or SPI DPRAM access.
  • Complete runtime solution independent of host CPU and OS
  • Configuration tool (configurator) Communication Studio included
  • Easy driver development with C source function code collection (free of charge)

Modulo di comunicazione SPI - slave Real-Time Ethernet

Modulo di comunicazione flessibile per l’automazione

Modulo di comunicazione SPI - slave Real-Time Ethernet

Modulo di comunicazione flessibile per l’automazione

Modulo di comunicazione Dual-Port Memory - Real-Time Ethernet

Modulo di comunicazione flessibile per l’automazione

Modulo di comunicazione Dual-Port Memory - Real-Time Ethernet

Modulo di comunicazione flessibile per l’automazione

Scheda di valutazione comX

Piattaforma di sviluppo per tutti i tipi comX

PC card cifX

cifX – compatible with PROFINET

Master/Slave support
Supports PROFINET and 7 other real-time Ethernet protocols in the same hardware. Protocols can be freely interchanged.

  • Supports various PC form factors (PCI, PCI Express, low profile PCI Express, MiniPCI, Mini PCI Express, CompactPCI, PC/104, PCI104)
  • Included executable firmware and API for easy and quick application implementation
  • Configuration tool and OPC server also provided
  • Drivers for various OS (Windows, VxWorks, INtime, RTX, Linux, Win CE, QNX)

Interfaccia di rete Real-Time Ethernet separata

Comunicazione per l’automazione basata su PC

Interfaccia di rete separata Real-Time Ethernet con connettori M12

Comunicazione per l’automazione basata su PC

Interfaccia di rete Real-Time Ethernet separata

Comunicazione per l’automazione basata su PC

Scheda PC M.2 2242 key B+M - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC M.2 3042 key B+M - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC M.2 2230 key A+E - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC per un intervallo di temperatura esteso PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI Express low profile - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC con NVRAM PCI Express low profile - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC Mini PCI Express half size - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC Mini PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC per un intervallo di temperatura esteso Mini PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC con NVRAM Mini PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC con NVRAM e intervallo di temperatura esteso Mini PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC senza dissipatore di calore Mini PCI Express - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC CompactPCI - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC Mini PCI - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI-104 - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI-104 con interfaccia separata - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI-104 - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PCI-104 con interfaccia separata - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PC/104 - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PC/104 con interfaccia separata - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PC/104 - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Scheda PC PC/104 con interfaccia separata - Real-Time Ethernet

Comunicazione per l’automazione basata su PC

Gateway netTAP

netTAP, netHOST and netLINK – compatible with PROFINET

netTAP, netHOST and netLINK - compatible with PROFINET, netTAP, netHOST and netLINK - easily exchange data between various industrial networks, including PROFINET. More than 200 possible combinations of real-time Ethernet, fieldbus and serial are supported.

  • Secure network isolation with internal buffer
  • Switching of communication protocols by firmware replacement (netTAP 151)
  • Fast conversion within 10 ms (netTAP 100/151)
  • SD card for instant device replacement (netTAP 100/151)

Gateway Real-Time Ethernet a Real-Time Ethernet

Trasmissione dati tra due reti Real-Time Ethernet

Gateway CC-Link IE Field Slave a PROFINET IO-Device

Accoppiamento dati tra CC-Link IE Field e PROFINET

Gateway CC-Link Slave a Ethernet

Gateway entry level ottimizzato per le conversioni semplici

Gateway CANopen a Ethernet

Gateway entry level ottimizzato per le conversioni semplici

Gateway seriale (ASCII) o Modbus RTU a Ethernet

Gateway entry level ottimizzato per le conversioni semplici

Gateway DeviceNet a Ethernet

Gateway entry level ottimizzato per le conversioni semplici

Gateway PROFIBUS DP a Ethernet

Gateway entry level ottimizzato per le conversioni semplici

Gateway Real-Time Ethernet a CC-Link Slave

Gateway di alto livello per conversioni impegnative

Gateway Real-Time Ethernet a CANopen

Gateway di alto livello per conversioni impegnative

Gateway Real-Time Ethernet a DeviceNet

Gateway di alto livello per conversioni impegnative

Gateway Real-Time-Ethernet a PROFIBUS DP

Gateway di alto livello per conversioni impegnative

Gateway Real-Time-Ethernet a Ethernet

Gateway di alto livello per conversioni impegnative

Gateway Real-Time-Ethernet a Modbus RTU, 3964R o Seriale (ASCII / programmabile)

Gateway di alto livello per conversioni impegnative

Connettore proxy PROFINET / PROFIBUS

Aggiornamento di una scheda secondaria PROFIBUS a PROFINET

Multiprotocollo Ethernet LAN Real-Time Ethernet

Master Ethernet in tempo reale con controllo LAN per guida DIN

Controller Ethernet LAN PROFINET IO

Controller PROFINET IO con controllo LAN per guida DIN

SPE Media Switch

Conversione da Single Pair Ethernet a Industrial Ethernet

Gateway PROFINET IO-Device a SmartWire-DT

Connettività SmartWire-DT ai sistemi PROFINET Real-Time Ethernet

Application example in PROFINET networks – netTAP gateway

A yellow network line on top with a PROFINET logo. Under the yellow line are three device icons in grey with a netTAP on the left side. The device are connected to the netTAP, while the netTAP itself is connected to the yellow network line.
Example of master-to-slave communication (subordinate connection) configuration
A graphic showing a yellow network line with three device icons and a PROFINET logo on the left. On the right, there are also three device icons and ablack network line. In the middle is a netTAP gateway between these two networks.
Example of master-to-master communication (parallel connection) configuration

Do you need troubleshooting for your PROFINET network? Use netANALYZER!

  • Four-channel Ethernet port for capturing two Ethernet data
  • Capable of simultaneous measurement at two locations
  • Capable of capturing Ethernet frame timestamps with 10ns resolution
  • Connects to a PC with Gigabit Ethernet port
  • Supports 9 real-time Ethernet types including PROFINET
  • Passive device without affecting the network or PLC
  • Automatically capture IO event signals with included software
  • Export of WinPcap files for use with Wireshark, the standard Ethernet analysis software
  • Optional extension software “netANALYZER Scope” for visualization of process data per protocol and data customization

Go to the netANALYZER product page

A netMIRROR and a netANALYZER on a colorful background. BOth devices are slightly mirrored on the bottom.

Related links

A photo collage showcasing various Hilscher products

Dai prodotti chiavi in mano alle soluzioni altamente integrate e al software complementare, Hilscher è il vostro partner per la comunicazione industriale. Qui trovate una panoramica su come possiamo aiutarvi a portare il networking delle vostre macchine a un livello completamente nuovo!

netX 90 communication controller mounted on a circuit board.

Panoramica dei nostri controller di comunicazione netX. Come soluzione altamente integrata, consentono di integrare in modo flessibile le macchine e i sistemi di produzione nella rete, indipendentemente dallo standard di rete. Forniamo hardware, software, certificazione e supporto da un’unica fonte.

A photo of the male and female customer support phone operator with different internationality
Customer Center / Sales Hilscher Gesellschaft für Systemautomation mbH

You've got questions? We've got the answers!

Rheinstraße 15
65795
Hattersheim
Hesse
Germany