www.hilscher.com Products Embedded Modules

Communication Module

COMX 100CN-DP

Communication module dual-port memory - PROFIBUS DP / MPI

Flexible communication module for automation

Universal PROFIBUS DP / PROFIBUS-MPI interface (Master or Slave) with network connection to the mainboard
Allows a flexible positioning of the network connector
Master or slave on the same hardware
Usable immediately due to preloaded firmware
Host connection via dual-port memory

The module for all communication tasks

The comX communication module is designed to be integrated into automation devices to provide drives, robot controllers, PLCs, etc. with a network interface. Communication tasks are all executed autonomously in the module - irrespective of the processor of the target device.

Process data is exchanged via a Dual-Port-Memory per access by an 8-/16-bit bus interface or a fast 50 MHz SPI interface.

comX supports all leading Real-Time Ethernet protocols as Master or Slave and meets all network-specific requirements in just one single module. To support a line topology, the module is equipped with two Ethernet ports. The communication protocol can be changed simply and reliably by loading the appropriate firmware and a software license for masters.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

COMX 100CN-DP supports the following protocols:

PROFIBUS DP Slave
PROFIBUS DP Master
PROFIBUS MPI

Technical Data

COMX 100CN-DP	Parameter	Value
Product	Part number	1532.410
Product	Brief description	Communication Module PROFIBUS
Communication controller	netX	netX 100
Integrated Memory	RAM	8 MB SDRAM
Integrated Memory	FLASH	4 MB serial Flash
Power supply	Supply voltage	+3.3 V DC ± 5 %
	Typical/maximum current	approx. 430 mA/460 mA (at 3.3 V)
	Typical power consumption	approx. 1.5 … 1.6 W
	Power connector	via system bus connector X1
System interface	Type	Parallel Dual-port memory interface
	Connector	50-pin SMT connector, socket
	Pin distance	1.27 mm
	Dual-port memory size	16 KByte
	Data width	8/16 bit
Communication interface	Communication standard	PROFIBUS
	Interface type	RS-485, potential-free
	Connector	30-pin SMT connector, socket, grid distance 1.27 mm, matching with plug type SAMTEC TFM-115-02-S-D–A
Diagnostic interface	Type	UART or USB
Diagnostic interface	Connector	Signal at host interface. Available only if integrated in host system.
Display	LED display	Signals at X2 for SYS System Status, green: RUN, yellow: RDY
Display	LED display	Signals at X2 COM Communication status, green: STA, red: ERR
Environment	Ambient temperature range for operation	-20 °C … +70 °C (Air flow during measurment: 0.5 m/s)
	Ambient temperature range for storage	-40 °C … +85 °C
	Humidity range	10 % … 95 % relative humidity (non-condensing)
Device	Dimensions (L x W x H)	70 mm x 30 mm x 21.5 mm
	Weight	approx. 35 g ... 40 g
	Mounting	using screwable metal bolts, according to comX Design Guide
Configuration	Configuration software	SYCON.net
Conformity	RoHS	yes
Conformance with EMC directives	CE sign	yes
	UKCA sign	yes
	Emission	EN 61000-6-4 / BS EN 61000-6-4
	Immunity	EN 61000-6-2 / BS EN 61000-6-2
	Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Air discharge method)	EN 61000-4-2 / BS EN 61000-4-2: ± 10 kV, Criterion B
	Electrostatic discharge (ESD) according to EN 61000-4-2 / BS EN 61000-4-2 (Contact discharge method)	EN 61000-4-2 / BS EN 61000-4-2: ± 6 kV, Criterion B
	Fast transient interferences (Burst) according to EN 61000-4-4 / BS EN 61000-4-4	EN 61000-4-4 / BS EN 61000-4-4: ± 2 kV, Criterion A (Communication lines, shielded)
	Surge voltage according to EN 61000-4-5 / BS EN 61000-4-5 (Communication and data lines)	EN 61000-4-5 / BS EN 61000-4-5: 1 kV, Criterion A (Communication lines, shielded)

Order Information

Product name	Part number	Brief description
COMX 100CN-DP	1532.410/DPM	Communication module dual-port memory - PROFIBUS DP / MPI

Downloads

Download Software

Open page [English]

Download Technical Documentation

Download Datasheet

Accessory

COMXEB

comX Evaluation Board

Development platform for all comX types

Active

COMX 51CA-RE

Communication module SPI - Real-Time Ethernet Slave

Flexible communication module for automation

Active

COMX 51CN-RE

Communication module SPI - Real-Time Ethernet Slave

Flexible communication module for automation

Active

COMX 51CA-RE\R/ECS

Communication module for the semiconductor industry

The module for the semiconductor manufacturing equipment market

Active

COMX 52CA-CCS

Communication module SPI - CC-Link Slave

The module for all communication tasks

Active

COMX 52CA-COS

Communication module SPI - CANopen Slave

The module for all communication tasks

Active

COMX 52CN-COS

Communication module SPI - CANopen Slave

The module for all communication tasks

Active

COMX 52CA-DPS

Communication module SPI - PROFIBUS DP Slave

The module for all communication tasks

Active

COMX 52CN-DPS

Communication module SPI - PROFIBUS DP Slave

The module for all communication tasks

Active

COMX 52CA-DNS

Communication module SPI - DeviceNet Slave

The module for all communication tasks

Active

COMX 52CN-DNS

Communication module SPI - DeviceNet Slave

The module for all communication tasks

Active

COMX 100CA-RE

Communication module dual-port memory - Real-Time-Ethernet

Flexible communication module for automation

Active

COMX 100CN-RE

Communication module dual-port memory - Real-Time Ethernet

Flexible communication module for automation

Active

COMX 100CA-CO

Communication module dual-port memory - CANopen

Flexible communication module for automation

Active

COMX 100CN-CO

Communication module dual-port memory - CANopen

Flexible communication module for automation

Active

COMX 100CA-DP

Communication module dual-port memory - PROFIBUS DP / MPI

Flexible communication module for automation

Active

COMX 100CN-DP

Communication module dual-port memory - PROFIBUS DP / MPI

Flexible communication module for automation

Active

COMX 100CN-DP\NIF

Communication module dual-port memory - PROFIBUS DP

Flexible communication module for automation

Active

COMX 100CN-DN

Communication module dual-port memory - DeviceNet

Flexible communication module for automation

Active

COMX 100CA-DN

Communication module dual-port memory - DeviceNet

Flexible communication module for automation

Active

COMXEB

comX Evaluation Board

Development platform for all comX types

Active

Newsletter Form

Fieldset

Stay up to date

In our newsletter we inform you regularly about our latest products, solutions as well as participation in events such as exhibitions and conferences. In this way, we offer exciting insights into the world of Hilscher and automation technology. Sign up now!

Fieldset

Salutation

First Name

Last Name *

Email Address *

I have read and accepted the privacy policy. *

Head of Human Resources (m/f/d)

Accounting professional (m/f/d)

Buyer for Indirect Material & Services (m/f/d)

Head of Human Resources (m/f/d)

Accounting professional (m/f/d)

Buyer for Indirect Material & Services (m/f/d)

COMX 100CN-DP

Communication module dual-port memory - PROFIBUS DP / MPI

The module for all communication tasks

Technical Data

Order Information

Downloads

Accessory

Related products: Communication module