Technologies

  • CANopen

PC card with detached interface PC/104 - CANopen-Slave

Communciation for PC-based Automation

Product Image

 

CIFX 104-COM-Image

CIFX 104-CO\F

Active

At a glance

  • Universal CANopen card for Master or Slave
  • Same application interface for all protocols and formats
  • Easy integration thanks to wide range of device drivers
  • Data access via Dual-Port-Memory or Direct Memory Access
  • Including 15cm or 30cm detached network connection
  • For extended temperature range up to 70°C

Weitere Informationen

Description

PC cards in all formats for all protocols

The cifX PC card family is the unified standard supporting all Real-Time Ethernet and Fieldbus systems for PC based automation.

The protocol stack is executed autonomously on the PC card and process data exchange with the host is done via Dual-Port-Memory or DMA (Direct Memory Access). Thanks to the common Hilscher Platform Strategy all PC cards use the same driver and tools - independent of protocol and card format. Thanks to the netX technology there is exactly one hardware needed for the realization of all Real-Time Ethernet protocols. A change of the communication protocol is done by just loading a different firmware.

Always the right solution! Different cable lengths, M-12 connectors, additional NVRAM, extended temperature range, 2-channel cards or detached network interfaces – numerous hardware options always offer the right solution for your application. On top, a wide range of device drivers and a C-Toolkit, free of charge, are available.

The PC based automation is evolving and the Hilscher cifX PC card family keeps the pace. With continuous expansion for new standards, protocols and formats, as M.2, mini PCIe halfsize or CC-Link IE Field, customers are always prepared for new market demands.

Technical Details

ProductProduct nameCIFX 104-CO\F
Part number1278.501
Brief descriptionPC Card cifX PC/104 CANopen Master or Slave - with cable connector fieldbus for CANopen assembly interface (AIFX-CO) - and cable connector DIAG for diagnostic assembly interface (AIFX-DIAG)
FunctionCommunication Interface with PC/104 and fieldbus interface CANopen
Communication controllerTypenetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash EPROM
Power supplySupply voltage+5 V DC ±5 %
Maximum current (typically)500 mA (at 5 V)
Connectorvia PC/104 Bus
System interfaceBus typePC/104
Data accessDPM
Dual-port memory size16 KByte
Data width8 bit or 16 bit
Transmission rate33 MHz
Communication interfaceCommunication standardCANopen
Interface typeISO-11898, optically isolated
ConnectorCable Connector Fieldbus X4 (X304) (JST 10FMN-SMT-A-TF(LF)(SN), pitch 1,0 mm) to connect a CANopen Assembly Interface AIFX-CO
Diagnostic interfaceConnectorCable Connector DIAG X303 (X3) (JST 12FMN-SMT-A-TF(LF)(SN), pitch 1,0 mm) to connect a Diagnostic Assembly Interface AIFX-DIAG
DisplaysLED displaySYS, System status LED
Permitted ambient conditionsOperating temperature range–20 °C ... +70 °C (Air flow during measurment: 0,5 m/s)
Storage temperature range–10 °C ... +70 °C
Humidity10 % … 95 % relative humidity, no condensation permitted
EnvironmentFor UL compliant usage: The device must be used in a pollution degree 2 environment.
DeviceDimensions (L x W x H)97 x 91 x 24 mm
Mounting/InstallationPC/104 Slot (5 V)
ConfigurationConfiguration software for master and SlaveSYCON.net
Configuration software SlavenetX Configuration Tool
ConformityRoHSYes
UL certificationULThe device is certified according to UL 508
UL fileUL-File-Nr. E221530
Conformance with EMC directivesCE signYes
EmissionEN 55011:2009 + A1:2010, CISPR 11:2009, Class A (Radio disturbance characteristics - Limits and methods of measurement)
ImmunityEN 61000-4-2:2009 (Electrostatic discharge test)
EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated, radio-frequency, electromagnetic field test)
EN 61000-4-4:2004 + A1:2010 (Burst Electrical fast transients/burst test)
EN 61000-4-5:2006 (Surge test)
EN 61000-4-6:2009 (to conducted disturbances, induced by radio- frequency fields)
EN 61000-4-8:2010 (power frequency magnetic field test)
EN 61000-6-2:2005 + B1:2011 (for industrial environments)

Ordering information

Product namePart numberBrief description
CIFX 104-CO\F1278.501PC card with detached interface PC/104 - CANopen-Slave

PC/104 cards are stackable PC cards utilizing the expiring ISA standard. Once plugged together they can build complex computer systems. The boards are available with integrated or detached network interfaces. They are used primarily in embedded designs or products, which have no specific size requirements.