Technologies

    Communication Module SPI - CC-Link IE Field Basic Slave

    The module for all communication tasks

    Product Image

     

    COMX51CN-RE-Image

    COMX 51CN-RE

    Active

    At a glance

    • Complete slave interface with network connector to the baseboard
    • For CC-Link IE Field Basic with 100 Mbit/s
    • Acyclic communication via SLMP
    • Host connection via dual-port memory or SPI
    • One hardware for all Real-Time Ethernet slave protocols
    • Enables flexible positioning of the network connector

    Weitere Informationen

    Description

    The module for all communication tasks

    The comX communication module has been designed to be integrated into automation devices e.g. robot controllers, PLCs or drives to add a network interface. All communication tasks are executed autonomously within the module - irrespective of the processor of the target device.

    Process data is exchanged via a Dual-Port-Memory which is accessed either by an 8-/16-bit bus interface or a fast 50 MHz SPI interface.

    comX supports all major Real-Time Ethernet protocols as Master or Slave and covers all network-specific demands in just one single module. To support a line topology, the module is equipped with two Ethernet ports. The communication protocol can be changed simply and reliably by loading the appropriate firmware and a software license for masters.

    Due to the Hilscher network controller netX, a 10-years delivery guarantee is granted.

    Ordering information

    Product namePart numberBrief description
    COMX 51CN-RE1572.100/CCIBSCommunication Module SPI - CC-Link IE Field Basic Slave

    Accessories

    Product namePart numberBrief description
    COMXEB1530.000comX Evaluation Board

    The comX communication module is a universal solution for upgrading devices with master or slave functionality. All modules are pin-compatible and have an identical software interface.
    There are designs with an integrated network connector and designs in which the network interface is tied to the base board.