NSHIELD 90-RE
Evaluation board

  • One piece of hardware for all industrial Real-Time Ethernet systems

  • netX 90 protocol-stack firmware available as free download for evaluation

  • Supports STM-NUCLEO-64 and STM-NUCLEO-144

  • Quick Start Guide for easy set-up of hardware and software

描述
技术数据
订单信息
下载

NSHIELD 90-RE, the successor of NSHIELD 52-RE, is a netX 90 SoC based evaluation board of the netX family.

Since its host interface connectors are compatible with Arduino Uno, plugging NSHIELD 90-RE into STM32 Nucleo-64 and Nucleo-144 development boards is easy.

NSHIELD 90-RE enables the user to connect a microcontroller-based application to many relevant Real-Time Ethernet industrial networks with first-class real-time capabilities, such as PROFINET, Ethernet/IP, EtherCAT, etc. The netX 90 is implemented as a "companion chip" to the STM32.

The netX 90 SoC architecture has been designed to meet the highest requirements on flexibility, determinism, and performance regarding multi-protocol capability and low latency for short cycle times. The heterogeneous multi-core architecture has an ARM processor core that is coupled with a flexible communication subsystem (xC) and supports many industrial applications.

The protocol stack runs independently on the netX 90 SoC and requires only little memory and almost no CPU resources of the host microcontroller.

NSHIELD 90-RE supports the following protocols:
  • CANopen Slave
  • DeviceNet Slave
  • EtherCAT Slave
  • EtherNet/IP Adapter
  • PROFINET IO-Device
  • Sercos Slave
  • CC-Link IE Field Basic Slave

技术数据

Category

Parameter

Value

Product

Name

NSHIELD 90-RE

Part number

7836.000

Function

Real-Time Ethernet expansion board for development and evaluation purposes for STM32 Nucleo host devices.

Communication controller

Type

netX 90

Integrated memory

RAM

8 MByte SDRAM

Flash

8 MByte Serial Flash Memory

Communication

Real-Time Ethernet protocols

  • CC-Link IE Field Basic Slave

  • EtherCAT Slave

  • EtherNet/IP Adapter

  • Open Modbus/TCP

  • POWERLINK Controlled Node

  • PROFINET IO-Device

  • Sercos Slave

Fieldbus protocols

  • CANopen Slave

  • DeviceNet Slave

  • PROFIBUS DP Slave

Host interface

Type

Serial dual-port memory interface via SPI

Host system

STM32 Nucleo-64 and Nucleo-144 development boards

Connectors

ARDUINO® Uno V3 compatible plug pin header strips
(1 x 6-pin, 2 x 8-pin and 1 x 10-pin)

Ethernet interface

Transmission rate

100 MBit/s (10 MBit/s)

Type

100BASE-TX, 10BASE-T

Galvanic isolation

isolated

Isolation voltage

1000 VDC

Connector

2 * Ethernet port (RJ45 socket) with Real-Time Ethernet switch for line and ring topologies

Fieldbus interface

Assembly

NXHX-DP, NXHX-CO, NXHX-DN

Connectors

Connector for NXHX fieldbus adapter modules

Diagnosis interface

Use and characteristics

USB-to-UART firmware download via on-board USB with virtual COM port

USB-to-JTAG debugging

Connector

Mini-B USB

Development

Test access point

Needle adapters JTAG TAP

Display elements

LEDs

SYS: System status (yellow/green)

COM0: Communication status (red/green)

COM1: Communication status (red/green)

ACT0: Ethernet activity status (yellow) at RJ45 channel 0

LINK0: Ethernet link status (green) at RJ45 channel 0

ACT1: Ethernet activity status (yellow) at RJ45 channel 1

LINK1: Ethernet link status (green) at RJ45 channel 1

MMIO0: User definable LED (yellow), not for user purposes

MMIO1: User definable LED (yellow), not for user purposes

MMIO2: User definable LED (yellow), not for user purposes

MMIO3: User definable LED (yellow), not for user purposes

MMIO

MMIO4, MMIO5, MMIO6, MMIO7

MMIO connectivity via host interface connector X6

Power supply

Supply voltage

5 V DC

Current consumption

300 mA at 5 V (typical)

Connector

Mini-B USB or Arduino host interface connector X5

Device

Permitted ambient conditions / Operating temperature range

0 °C … +30 °C (laboratory conditions)

Dimensions (L x W x H)

70.2 mm x 53.4 mm x 23.6 mm

Mounting/installation

Plug-on module. Mounting via Arduino pin headers.

Operating elements

Reset button

Boot mode selection

Power supply selection

Configuration

Configuration

Application using the API, Communication Studio

订单信息

Product name

Part number

Brief description

NSHIELD 90-RE

7836.000

Evaluation board

下载

下载数据表
下载软件
下载技术文档

Related topics and products

A photo collage showcasing various Hilscher products
赫优讯通讯解决方案概述

从交钥匙产品到高度集成的解决方案和补充软件，赫优讯是您工业通讯的合作伙伴。了解我们如何帮助您将您的机器联网提升到一个全新的水平！

了解更多
我们的 netX 通讯控件概览

我们的 netX 通讯控件概览。作为一种高度集成的解决方案，无论网络标准如何，它们都能让您灵活地将机器和生产系统集成到网络中。我们从单一来源提供硬件、软件、认证和支持。

了解更多
Four different embedded modules from Hilscher on a colorful background. The devices are slightly mirrored on the bottom.
我们的嵌入式模块适用于所有工业协议

赫优讯的嵌入式模块是将现场总线或实时以太网接口集成到紧凑型自动化设备中的理想解决方案。它们允许将驱动器或控件等现场设备快速、轻松地集成到自动化系统中。

了解更多
IP40 可互换模块

只需一个模块，即可执行所有工业通讯协议。netJACK 是所有需要主站或从站功能应用的通用解决方案。

了解更多
通讯模块

为您的机器人、PLC 或驱动器配备网络接口。comX 是适用于所有需要主站或从站功能的应用的通用解决方案。

了解更多
DIL-32 通讯 IC

netIC 是数据吞吐量较低的简单现场设备（如条形码扫描仪、识别系统、阀组和输入/输出模块）的理想从站解决方案。

了解更多
netX 芯片载体

使用 netRAPID 快速安全地实现从站接口。netX 芯片载体是成本密集型内部开发的替代方案。

了解更多
Three PC cards on a colorful background. One has a red PCB while the other two are green. One has an AIFX detached network interface connected to it.
cifX - 用于基于 PC 的自动化的多协议 PC 板卡

cifX PC 板卡是将基于 PC 的设备集成到自动化环境中的最简单、最快捷的方法。基于我们的 netX 通讯控件，您可以使用所有协议--适用于任何应用的任何外形尺寸。

了解更多