COMX 90CA-RE

Communication module SPI - Real-Time Ethernet Slave

Product

Part number

1591.100

Brief description

Communication Module Real-Time Ethernet

Communication controller

netX

netX 90

Integrated Memory

RAM

8 MByte

FLASH

8 MByte serial Flash

Power supply

Supply voltage

+3.3 V DC ± 5 %

Typical/maximum current

201 mA (at 3.3 V) / 206 mA (at 3.0 V)

Typical power consumption

680 mW

Power connector

Via system bus connector X1

System interface

Type

Serial dual-port memory interface

Connector

50-pin SMT connector, socket

Pin distance

1.27 mm

Dual-port memory size

32 KByte

Serial dual-port memory interface

SPI Slave, mode 3

Baud rate

max. 50 MHz

Communication interface

Communication standard

Ethernet

Interface type

10BASE-T/100BASE-TX, potential-free

Auto negotiation

supported

Auto cross over

supported

Connector

2 * RJ45 socket

Diagnostic interface

Type

UART

Connector

Signal at host interface. Available only if integrated in host system.

Display

LED display

SYS System Status, green: RUN, yellow: RDY

COM0, COM1 Communication status, both green/red

ACT0, ACT1, Ethernet activity status, yellow

LINK0, LINK1, Ethernet link status, green

Environment

Ambient temperature range for operation

-20 °C ... +75 °C (Air flow during measurement: 0,5 m/s)

Ambient temperature range for storage

-40 °C … +85 °C

Humidity range

10 % … 95 % relative humidity (non-condensing)

Altitude

0 m … 2000 m

Device

Dimensions (L x W x H)

70.1 mm x 32.6 mm x 21.2 mm

Weight

31 g

Mounting

using screwable metal bolts, according to comX Design Guide

Configuration

Configuration software

Communication Studio

API

By application

Conformity

RoHS

yes

Conformance with EMC directives

CE sign

yes

UKCA sign

yes

Emission

EN 61000-6-4 / BS EN 61000-6-4

Immunity

EN 61000-6-2 / BS EN 61000-6-2

COMX 90CA-RE

1591.100

Communication module SPI - Real-Time Ethernet Slave