A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is a PROFINET logo in green.
empowering communication
主页
登陆页面

PROFINET communication solutions by Hilscher

Are you looking for a solution to develop PROFINET compatible products, connect to a PROFINET network, or analyze industrial communications over PROFINET?  Hilscher provides reliable solutions for these various issues. Using embedded modules, PC cards, gateways, and network analyzers based on our original multi-protocol communication SoC “netX”, devices and machines can be reliably,flexibly connected, and processed. Hilscher is a member of PI (PROFIBUS & PROFINET International) and our products comply with the latest standards in PROFINET technology. Let the technology of the market leader take care of you!

A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is a PROFINET logo in green.

netRAPID 90 – compatible with PROFINET

  • Ultra-compact embedded communication module with netX 90 IoT & industrial communication controller on a 15 x 32 mm board
  • Stand-alone or companion module available
  • Supports various industrial communication protocols with exchangeable firmware
  • Supports IoT/cloud communication functions such as OPC UA and MQTT

NRP H90(预加载)

经过全面测试和加载的超紧凑 netX 90 设计

NRP H90\F8D8(预加载)

经过全面测试和预加载的超紧凑 netX 90 设计

comX – compatible with PROFINET

comX is a fully executable interface that implements the hardware and software required for PROFINET communication in a single module. It can realize PROFINET master and slave in a short period of time and at low cost with high performance.

  • Communication with the host is via parallel 8-bit/16-bit or SPI DPRAM access.
  • Complete runtime solution independent of host CPU and OS
  • Configuration tool (configurator) Communication Studio included
  • Easy driver development with C source function code collection (free of charge)

COMX 90CN-PNS-IOT

Flexible communication module for automation

COMX 90CN-PNS

Flexible communication module for automation

COMX 90CA-RE

Flexible communication module for automation

COMX 51CA-RE

用于自动化的灵活通讯模块

COMX 51CN-RE

用于自动化的灵活通讯模块

COMXEB

适用于所有 comX 类型的开发平台

COMX 100CA-RE

用于自动化的灵活通讯模块

COMX 100CN-RE

用于自动化的灵活通讯模块

cifX – compatible with PROFINET

Master/Slave support
Supports PROFINET and 7 other real-time Ethernet protocols in the same hardware. Protocols can be freely interchanged.

  • Supports various PC form factors (PCI, PCI Express, low profile PCI Express, MiniPCI, Mini PCI Express, CompactPCI, PC/104, PCI104)
  • Included executable firmware and API for easy and quick application implementation
  • Configuration tool and OPC server also provided
  • Drivers for various OS (Windows, VxWorks, INtime, RTX, Linux, Win CE, QNX)

CIFX M224290BM-RE\F

用于基于 PC 的自动化通讯板卡

CIFX M223090AE-RE\F

用于基于 PC 的自动化通讯板卡

CIFX M3042100BM-RE\F

用于基于 PC 的自动化通讯板卡

CIFX PCIE90-RE

CRA-compliant communication for PC-based automation

CIFX 50E-RE

用于基于 PC 的自动化通讯板卡

CIFX 50E-RE\ET

用于基于 PC 的自动化通讯板卡

CIFX LPCIE90-RE

CRA-compliant communication for PC-based automation

CIFX 70E-RE

用于基于 PC 的自动化通讯板卡

CIFX 70E-RE\MR

用于基于 PC 的自动化通讯板卡

CIFX HPCIE90-RE\F

用于基于 PC 的自动化通讯板卡

CIFX 90E-RE\ET\F

用于基于 PC 的自动化通讯板卡

CIFX 90E-RE\MR\ET\F

用于基于 PC 的自动化通讯板卡

CIFX 90E-RE\NHS\F

用于基于 PC 的自动化通讯板卡

CIFX 90E-RE\F

用于基于 PC 的自动化通讯板卡

CIFX 90E-RE\MR\F

用于基于 PC 的自动化通讯板卡

CIFX 50-RE

用于基于 PC 的自动化通讯板卡

CIFX 80-RE

用于基于 PC 的自动化通讯板卡

AIFX-RE

用于基于 PC 的自动化通讯板卡

AIFX-RE\M12

用于基于 PC 的自动化通讯板卡

CIFX 90-RE\F

用于基于 PC 的自动化通讯板卡

CIFX 104C-RE

用于基于 PC 的自动化通讯板卡

CIFX 104C-RE\F

用于基于 PC 的自动化通讯板卡

CIFX 104C-RE-R

用于基于 PC 的自动化通讯板卡

CIFX 104C-RE-R\F

用于基于 PC 的自动化通讯板卡

AIFX-RE

用于基于 PC 的自动化通讯板卡

AIFX-RE\M12

用于基于 PC 的自动化通讯板卡

CIFX 104-RE

用于基于 PC 的自动化通讯板卡

CIFX 104-RE-R

用于基于 PC 的自动化通讯板卡

CIFX 104-RE\F

用于基于 PC 的自动化通讯板卡

CIFX 104-RE-R\F

用于基于 PC 的自动化通讯板卡

AIFX-RE

用于基于 PC 的自动化通讯板卡

AIFX-RE\M12

用于基于 PC 的自动化通讯板卡

netTAP, netHOST and netLINK – compatible with PROFINET

netTAP, netHOST and netLINK - compatible with PROFINET, netTAP, netHOST and netLINK - easily exchange data between various industrial networks, including PROFINET. More than 200 possible combinations of real-time Ethernet, fieldbus and serial are supported.

  • Secure network isolation with internal buffer
  • Switching of communication protocols by firmware replacement (netTAP 151)
  • Fast conversion within 10 ms (netTAP 100/151)
  • SD card for instant device replacement (netTAP 100/151)

NT 151-RE-RE

两个实时以太网网络之间的数据传输

NT 151-CCIES-RE/PNS

CC-Link IE Field与PROFINET之间的数据耦合

NT 50-DP-EN

经济的入门级网关,用于简单转换

NT 50-DN-EN

经济的入门级网关,用于简单转换

NT 50-CC-EN

经济的入门级网关,用于简单转换

NT 50-CO-EN

经济的入门级网关,用于简单转换

NT 50-RS-EN

经济的入门级网关,用于简单转换

NT 100-RE-RS

用于高要求转换的高端网关

NT 100-RE-CC

用于高要求转换的高端网关

NT 100-RE-CO

用于高要求转换的高端网关

NT 100-RE-DN

用于高要求转换的高端网关

NT 100-RE-DP

用于高要求转换的高端网关

NT 100-RE-EN

用于高要求转换的高端网关

NL 51N-DPL

升级 PROFIBUS 从站到 PROFINET

NHST-T100-EN

用于DIN导轨的局域网控制实时以太网主站

NHST-T100-EN/PNM

用于 DIN 导轨的 LAN 控制 PROFINET IO 控制器

NS 90-RE-SPE

单对以太网转换为工业以太网

EU5C-SWD-PROFINET

SmartWire-DT 连接到实时以太网 PROFINET 系统

Next-Generation, High-Performance ASICs

netX 90” Ultra-compact IoT & Industrial Multifunctional Communication Controller
Supports various industrial communication protocols by replacing firmware
One-chip solution for 10mm square slaves

Product Features

  • Arm® Cortex®-M4 100MHz x 2 cores (communication & application)
  • Built-in 1.5MB FLASH / 640KB SRAM
  • World's smallest class 10 x 10mm package
  • Single 3.3V power supply
  • 2 PHYs built-in
A colorful block diagram of a netX 90 controller in light and dark blue. In the middle of the picture is a double-headed horizontal arrow.
netX 90: Multiprotocol communication controller

Application example in PROFINET networks – netTAP gateway

A yellow network line on top with a PROFINET logo. Under the yellow line are three device icons in grey with a netTAP on the left side. The device are connected to the netTAP, while the netTAP itself is connected to the yellow network line.

Example of master-to-slave communication (subordinate connection) configuration

A graphic showing a yellow network line with three device icons and a PROFINET logo on the left. On the right, there are also three device icons and ablack network line. In the middle is a netTAP gateway between these two networks.

Example of master-to-master communication (parallel connection) configuration

Do you need troubleshooting for your PROFINET network? Use netANALYZER!

  • Four-channel Ethernet port for capturing two Ethernet data
  • Capable of simultaneous measurement at two locations
  • Capable of capturing Ethernet frame timestamps with 10ns resolution
  • Connects to a PC with Gigabit Ethernet port
  • Supports 9 real-time Ethernet types including PROFINET
  • Passive device without affecting the network or PLC
  • Automatically capture IO event signals with included software
  • Export of WinPcap files for use with Wireshark, the standard Ethernet analysis software
  • Optional extension software “netANALYZER Scope” for visualization of process data per protocol and data customization

Go to the netANALYZER product page

A netMIRROR and a netANALYZER on a colorful background. BOth devices are slightly mirrored on the bottom.

Related links

netX 90 communication controller mounted on a circuit board.

我们的 netX 通讯控件概览。作为一种高度集成的解决方案,无论网络标准如何,它们都能让您灵活地将机器和生产系统集成到网络中。我们从单一来源提供硬件、软件、认证和支持。

从交钥匙产品到高度集成的解决方案和补充软件,赫优讯是您工业通讯的合作伙伴。了解我们如何帮助您将您的机器联网提升到一个全新的水平!

A photo of the male and female customer support phone operator with different internationality

Customer Center / Sales Hilscher Gesellschaft für Systemautomation mbH

You've got questions? We've got the answers!

Newsletter Form

Fieldset

Stay Up to Date

In our newsletter we inform you regularly about our latest products, solutions as well as participation in events such as exhibitions and conferences. In this way, we offer exciting insights into the world of Hilscher and automation technology. Sign up now!

Fieldset