A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is an EtherNet/IP logo in blue and yellow.
empowering communication

EtherNet/IP communication solutions by Hilscher

Are you looking for a solution to develop EtherNet/IP compatible products and connect them to the EtherNet/IP network, or analyze industrial communications over EtherNet/IP? Hilscher provides reliable solutions for these various issues. Using embedded modules, PC cards, gateways, and network analyzers based on our original multi-protocol communication SoC “netX”, devices and machines can be reliably, flexibly connected, and processed.Hilscher is a member of the ODVA and supports networking technologies based on the Common Industrial Protocol (CIP), and our products comply with the latest standards in EtherNet/IP technology. Let the technology of the market leader take care of you!

A line of 8 industrial communication products by Hilscher on a blue and red background. On a white area on the right side, there is an EtherNet/IP logo in blue and yellow.

Chip Carrier communication module netRAPID 90 with netX 90 [Product Features]

netRAPID 90 - compatible with EtherNet/IP

  • Ultra-compact embedded communication module with netX 90 IoT & industrial communication controller on a 15 x 32 mm board
  • Stand-alone or companion module available
  • Supports various industrial communication protocols with exchangeable firmware
  • Supports IoT/cloud communication functions such as OPC UA and MQTT

‌netX 90 芯片载体 - 预加载协议栈

经过全面测试和加载的超紧凑 netX 90 设计

NetX 90 芯片载体,具有额外的存储器 预加载协议栈

经过全面测试和预加载的超紧凑 netX 90 设计

netRAPID H90 评估板 - 实时以太网和现场总线

配备 NRP H90-RE\F8D8

Embedded communication module comX

comX - compatible with EtherNet/IP

comX is a fully executable interface that implements the hardware and software required for EtherNet/IP communication in a single module. It can realize EtherNet/IP master and slave in a short period of time and at low cost with high performance.

  • Communication with the host is via parallel 8-bit/16-bit or SPI DPRAM access.
  • Complete runtime solution independent of host CPU and OS
  • Configuration tool (configurator) Communication Studio included
  • Easy driver development with C source function code collection (free of charge)

SPI - 实时以太网从站通讯模块

用于自动化的灵活通讯模块

SPI - 实时以太网从站通讯模块

用于自动化的灵活通讯模块

通讯模块双端口内存 实时以太网

用于自动化的灵活通讯模块

通讯模块双端口内存 实时以太网

用于自动化的灵活通讯模块

comX 评估板

适用于所有 comX 类型的开发平台

PC card cifX

cifX – compatible with EtherNet/IP

Master/Slave support
Supports EtherNet/IP and 7 other real-time Ethernet protocols in the same hardware. Protocols can be freely interchanged.

  • Supports various PC form factors (PCI, PCI Express, low profile PCI Express, MiniPCI, Mini PCI Express, CompactPCI, PC/104, PCI104)
  • Included executable firmware and API for easy and quick application implementation
  • Configuration tool and OPC server also provided
  • Drivers for various OS (Windows, VxWorks, INtime, RTX, Linux, Win CE, QNX)

‍带一个独立接口 实时以太网‍的 PCI-104 ‍PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍Low Profile CI Express- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍‍带有 NVRAM Mini PCI Express - 实时以太网的 PC ‍板卡

用于基于 PC 的自动化通讯板卡

MiniPCI Express- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

用于扩展温度范围 PCI Express - 实时以太网的 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PCI-104- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PC/104 与独立接口 - 实时以太网 PC 板卡

用于基于 PC 的自动化通讯板卡

MiniPCI - 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PCI Express- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍带一个独立接口 实时以太网‍的 PCI-104 ‍PC ‍板卡

用于基于 PC 的自动化通讯板卡

M.2 3042 Key B+M 实时以太网 PC 板卡

用于基于 PC 的自动化通讯板卡

‍实时以太网独立网络接口

用于基于 PC 的自动化通讯板卡

PC/104 - 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

带 M12 连接器的实时以太网独立网络接口

用于基于 PC 的自动化通讯板卡

配有 NVRAM 和扩展温度 Mini PCI Express 实时以太网的 PC 板卡

用于基于 PC 的自动化通讯板卡

PCI - 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

不带散热器 Mini PCI Express - 实时以太网的 PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍‍带有 NVRAM Low Profile CI Express- 实时以太网的 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PC/104 - 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

CompactPCI- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PC/104 与独立接口 - 实时以太网 PC 板卡

用于基于 PC 的自动化通讯板卡

用于扩展温度范围 MiniPCI Express - 实时以太网的 PC ‍板卡

用于基于 PC 的自动化通讯板卡

PCI-104- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍半尺寸 MiniPCI Express- 实时以太网 PC ‍板卡

用于基于 PC 的自动化通讯板卡

‍实时以太网独立网络接口

用于基于 PC 的自动化通讯板卡

M.2 2230 Key A+E 实时以太网 PC 板卡

用于基于 PC 的自动化通讯板卡

M.2 2242 Key B+M 实时以太网 PC 板卡

用于基于 PC 的自动化通讯板卡

Gateway netTAP

netTAP, netHOST and netLINK – compatible with EtherNet/IP

netTAP, netHOST and netLINK - compatible with EtherNet/IP, netTAP, netHOST and netLINK - easily exchange data between various industrial networks, including EtherNet/IP. More than 200 possible combinations of real-time Ethernet, fieldbus and serial are supported.

  • Secure network isolation with internal buffer
  • Switching of communication protocols by firmware replacement (netTAP 151)
  • Fast conversion within 10 ms (netTAP 100/151)
  • SD card for instant device replacement (netTAP 100/151)

CANopen 到以太网的网关

经济的入门级网关,用于简单转换

以太网 LAN EtherNet/IP 扫描器

用于 DIN 导轨的 LAN 控制 EtherNet/IP 扫描器

实时以太网到 DeviceNet 的网关

用于高要求转换的高端网关

PROFIBUS DP 到以太网的网关

经济的入门级网关,用于简单转换

网关实时以太网到实时以太网

两个实时以太网网络之间的数据传输

网关实时以太网到Modbus RTU、3964R或串行(ASCII /可编程)

用于高要求转换的高端网关

DeviceNet 到 以太网的网关

经济的入门级网关,用于简单转换

网关串行(ASCII)或Modbus RTU至以太网

经济的入门级网关,用于简单转换

实时以太网到 CC-Link 从站的网关

用于高要求转换的高端网关

CC-Link 从站到以太网的网关

经济的入门级网关,用于简单转换

实时以太网到以太网的网关

用于高要求转换的高端网关

实时以太网到 PROFIBUS DP 的网关

用于高要求转换的高端网关

以太网LAN实时以太网多协议

用于DIN导轨的局域网控制实时以太网主站

实时以太网到 CANopen 的网关

用于高要求转换的高端网关

媒体交换机 SPE 至 RTE

使用实时以太网协议连接单对以太网网络

Application example in EtherNet/IP networks – netTAP gateway

A yellow network line on top with an EtherNet/IP logo. Under the yellow line are three device icons in grey with a netTAP on the left side. The device are connected to the netTAP, while the netTAP itself is connected to the yellow network line.
Example of master-to-slave communication (subordinate connection) configuration

Do you need troubleshooting for your EtherNET/IP network? Use netANALYZER!

  • Four-channel Ethernet port for capturing two Ethernet data
  • Capable of simultaneous measurement at two locations
  • Capable of capturing Ethernet frame timestamps with 10ns resolution
  • Connects to a PC with Gigabit Ethernet port
  • Supports 9 real-time Ethernet types including PROFINET
  • Passive device without affecting the network or PLC
  • Automatically capture IO event signals with included software
  • Export of WinPcap files for use with Wireshark, the standard Ethernet analysis software
  • Optional extension software “netANALYZER Scope” for visualization of process data per protocol and data customization

Go to the netANALYZER product page

A netMIRROR and a netANALYZER on a colorful background. BOth devices are slightly mirrored on the bottom.

Related links

The flag of Japan in white with a large red dot in the middle.
Hilscher Japan KK (ヒルシャー・ジャパン株式会社)

Our industrial communication experts from Tokyo equip state-of-the-art production facilities in Japan with multiprotocol communication technology.

Hilscher Japan KK
Itchome Sanbankan Bldg.
1-3-12 Shinjuku, Shinjuku-ku
Tokyo, 160-0022
Japan

YKB Shinjuku-Gyoen Bldg.
1-3-8 Shinjuku, Shinjuku-ku
160-0022
Tokyo
Japan
netX 90 communication controller mounted on a circuit board.

我们的 netX 通讯控件概览。作为一种高度集成的解决方案,无论网络标准如何,它们都能让您灵活地将机器和生产系统集成到网络中。我们从单一来源提供硬件、软件、认证和支持。

A photo collage showcasing various Hilscher products

从交钥匙产品到高度集成的解决方案和补充软件,赫优讯是您工业通讯的合作伙伴。了解我们如何帮助您将您的机器联网提升到一个全新的水平!