www.hilscher.com
Service & Support
Glossar
Time Sensitive Networking (TSN)

Time Sensitive Networking (TSN)

Introduction

Time-Sensitive Networking (TSN) is a set of standards developed to enhance the capabilities of Ethernet networks to support real-time, time-sensitive applications. It aims to address the growing need for deterministic data transmission over Ethernet networks. Traditional Ethernet networks were not originally designed to guarantee deterministic communication, which is essential for applications such as industrial automation, automotive systems, audio/video streaming, and power distribution, where precise timing and low latency are critical. The major fieldbus organizations have therefore developed proprietary industrial Ethernet protocols for industrial automation, like PROFINET or EtherCAT, although these are manufacturer-dependent and not readily compatible with classic Ethernet. Therefore, TSN is developed under the umbrella of the IEEE 802.1 working group, which has been actively enhancing Ethernet standards to support time-sensitive and interoperable applications. 

TSN aims to address these challenges by providing mechanisms to ensure predictable and bounded latency, synchronization, and prioritized delivery of data packets over Ethernet networks. It achieves this through a combination of standardized protocols, enhancements, and mechanisms that work together to create a deterministic communication environment. 

Time-Sensitive Networking marks a transformative step in the evolution of Ethernet, extending its applicability to domains where timing and reliability are paramount. By incorporating mechanisms for precise time synchronization, traffic scheduling, and fault tolerance, TSN enables Ethernet networks to meet the stringent requirements of a wide range of time-sensitive applications. As TSN standards continue to evolve, they promise to unlock new possibilities for networked systems across various industries, driving innovation and efficiency in the era of digital transformation, IIoT and Industry 4.0. TSN facilitates the deployment of reliable and scalable solutions for a wide range of time-sensitive applications across various industries. 

Key Features of TSN

  • Time Synchronization

    TSN ensures that all devices on a network share the same sense of time, minimizing the likelihood of time drifts that may lead to delays and variation in data transfer. Basically, it enables precise synchronization of clocks across network devices to establish a common time reference. This synchronization is crucial for coordinating actions and ensuring accurate timing in distributed systems. 

  • Scheduled Traffic (Cycles and Time Slots)

    TSN defines "time-aware shapers" that assign specific time slots to different types of network traffic, prioritizing them according to their type. This allows for predictable and efficient use of network resources. It allows critical data to be transmitted with higher priority and deterministic latency.  

  • Frame Preemption

    TSN allows the transmission of large frames to be interrupted in order to allow short, high-priority, time-critical frames to take precedence. This mechanism improves determinism in Ethernet networks by enabling seamless and predictable communication for real-time applications.  

  • Traffic Classification (Priority Handling)

    TSN provides mechanisms for classifying and prioritizing network traffic based on its requirements and importance, ensuring that critical data is given priority. This ensures timely delivery of time-sensitive packets, even in congested network conditions. 

  • Security Enhancements

    TSN includes security mechanisms to protect data integrity and confidentiality. These mechanisms address concerns such as unauthorized access, data tampering, and denial-of-service attacks, ensuring the security of time-sensitive communications. 

  • Queuing Disciplines and Traffic Scheduling Algorithms

    TSN enables the prioritization of time-critical traffic using queuing disciplines and traffic scheduling algorithms. It helps to establish deterministic paths for time-sensitive traffic streams. By reserving bandwidth and ensuring predictable routes, TSN helps guarantee timely delivery of critical data. 

Differences between TSN and Real Time Ethernet

Time-Sensitive Networking (TSN) and Real-Time Ethernet (RTE) both aim to improve Ethernet capabilities for industrial applications requiring precise timing and low latency, yet they have distinct characteristics. 

RTE encompasses various Ethernet-based communication protocols designed to provide real-time capabilities for industrial automation. Examples include Ethernet/IP, PROFINET, and EtherCAT. These protocols enhance traditional Ethernet with proprietary modifications to achieve the determinism, low latency, and high reliability required for industrial processes. Each RTE protocol tailors Ethernet's standard frame formats and timing mechanisms to ensure that time-critical data is prioritized and transmitted within the required time frame, making them suitable for applications like automation and control. 

TSN is a set of IEEE standards extending standard Ethernet to provide deterministic performance. TSN introduces features like time synchronization, traffic scheduling, and the ability to prioritize time-critical data over general data traffic. Unlike the proprietary nature of RTE protocols, TSN aims for a universal, standard-based approach, enabling interoperability across different manufacturers and devices. TSN’s advanced scheduling and synchronization capabilities ensure that time-critical applications such as robotics and motion control can coexist with non-critical data on the same network, without interference. Compared to the RTE protocols, TSN is compatible with standard Ethernet and therefore also with conventional corporate IT, which brings major advantages for networking IT and OT. 

In essence, while RTE provides deterministic performance through protocol-specific enhancements, TSN offers a standard-based, interoperable solution that extends Ethernet's capabilities to meet the stringent requirements of real-time industrial applications. 

Applications of TSN

  • Industrial Automation and Control

    TSN enables synchronized control loops, precise motion control, and reliable data exchange between sensors, actuators, and controllers, improving productivity, efficiency, and safety in manufacturing environments. It enables the convergence of operational technology (OT) and information technology (IT) networks, supporting both critical control data and general-purpose data on the same network, enabling Industry 4.0. 

  • Automotive Systems

    TSN ensures reliable and low-latency communication between onboard sensors, control units, and external systems, facilitating the development of safer and more efficient vehicles. Basically, it is an enabler of the application of Ethernet networks within a car, simplifying network architecture and improving reliability. It supports a wide range of applications, from infotainment systems to critical safety systems like braking and steering. 

  • Networking Infrastructure

    TSN can also be used to enhance the networking infrastructure itself, improving the performance, reliability, and scalability of Ethernet-based networks. It is usually used to build fronthaul bridged networks that meet the stringent requirements of the fronthaul flows, providing enhancements for synchronization.  

  • Power Distribution and Energy Management

    TSN is applied in power distribution and energy management systems to support smart grid technologies, renewable energy integration, and demand-response mechanisms. TSN enables precise synchronization and coordination of energy generation and distribution as well. 

Related Links

A photo of the male and female customer support phone operator with different internationality

Customer Center / Sales Hilscher Gesellschaft für Systemautomation mbH

You've got questions? We've got the answers!

Phone +49 (6190) 99070 90
Employee sitting on the back of a couch in Hilscher's office building.

Unterstützung für Ihre Projekte

Sie sind auf der Suche nach einem Integrationspartner für Ihr industrielles Kommunikationsprojekt? Von multiprotokollfähigen netX-Chips bis IIoT-Anwendungen – unser Netzwerk aus Partnerunternehmen bietet Ihnen den Support, den Sie benötigen!

Mehr erfahren
Communication controllers and printed circuit boards are extensively tested at Hilscher in Germany.

Vom netX-Chip bis zur Cloud – die Hilscher-Technologie

Wir machen industrielle Kommunikation möglich. Vom Legacy-Feldbus über Real-Time-Ethernet bis in die Cloud. Unsere Lösungen sind multiprotokollfähig, flexible und zuverlässig. Erfahren Sie mehr darüber, wie unsere netX Software- und Hardware-Technologien funktionieren und wie wir mit unserer IIoT-Plattform netFIELD Maschinendaten für Sie zugänglich machen.

Mehr erfahren

Newsletter Form

Fieldset

Stay Up to Date

In our newsletter we inform you regularly about our latest products, solutions as well as participation in events such as exhibitions and conferences. In this way, we offer exciting insights into the world of Hilscher and automation technology. Sign up now!

Fieldset