Home | Sitemap

		deutsch | 		français | 		italiano | 		日本語 | 		简体中文	

Datasheets

NXDB 500-SYS
english, PDF

Home | Products | Boards netX | NXDB 500-SYS

NXDB 500-SYS

netX 500 System Development Board

The System Development Board is the base for extensive hardware and software developments around the netX.
Various types of memory and interfaces, Touch LCD Display, as well as switches and LEDs as digital inputs and outputs permit putting almost all functions into operation and to access the signals on pin connectors.
The Host interface in the Dual Port mode can be tested with a DIMM PC or in the Extension Bus Mode via inserted DIMM memory boards (to be ordered separately).

We recommend the Hitex Tantino JTAG emulator for programming and start-up.
Online recording of the command executions is possible via the ETM interface such as offered by the Hitex-Tanto.
See http://www.hitex.com/products.html Upon delivery, the available software stacks will be made available as free evaluation versions on the internet.

Facts at a glance:

netX 500 with master license
16 MByte 16-bit Flash
32 MByte 32-bit SDRAM
256 KByte 16-bit SRAM
32 KByte 8-bit NVRAM
512 KByte serial SPI DataFlash
240x320 Pixel Color TFT LCD with touch and backlight
2x Ethernet with switch and hub functionality
Fieldbus interface for AS-Interface (only Master), CANopen, CC-Link, DeviceNet, InterBus (only Master) and PROFIBUS
SB 1.1 host / device
Multi Media Card socket
JTAG- and ETM Interface
IrDA
JTAG- and ETM Interface
CPU Signals accessible via grouped pin connectors
DIMM socket for DIMM PCs or memory card

Product		NXDB 500-SYS
Description		netX 500 System Development Board