 |
 |
| |
|
|
| |
 |
| |
Hilscher GmbH Rheinstraße 15 65795 Hattersheim Germany
Telephone: +49 (0)6190 9907-0 Facsimile: +49 (0)6190 9907-50
E-mail: info@hilscher.com |
|
| |
|
 |
 |
 |
 |
 |
SERCOS-III |
|
 |
|
|
|
| History |
|
| Norm |
IEC 61158 |
| User association |
Interessengemeinschaft SERCOS interface e.V.
www.sercos.de |
| Market leader |
Bosch Rexroth |
| Market |
world wide |
|
|
|
|
SERCOS III is a communication technolgy based on IEEE 802.3 and uses 100 MBit/s. The data is transferred determinic and collision free by means of a time slot method.
As topology ring and line structure is possible. If the master and the slaves are connected in a ring (exactly a double ring), then redundancy against cable break exists.
In opposite to standard Ethernet the frames are processed by the slaves when the frame passes through the slave. A slave inserts the data 'on the fly' into the telegram.
Any Ethernet frame can be transferred in the optional and configurable NRT channel.
SERCOS is used n particular in applications with precise and high synchronous processes. For synchronisation a synchronisation mark is used. On this all time based actions in the master and the slaves are synchronised.
|
| System data |
|
| Max. devices |
254 |
| Max. baudrate |
100 MBit/s |
| Max. extension |
100 m between two devices |
| Bus access |
Time slot method |
| Connection |
Cyclic, acyclic, cross communication |
| Communication |
Master / Slave |
| Message channel |
Service channel / IP channel |
|
|
|
Appropriate support and product information
Manuals and notes
Drivers
|
| |
|
 |
 |